Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

This is the most versatile work station you will ever use

Need Delta Technical Support

Posts

Need Delta Technical Support

#1

Need Delta Technical Support

Steven Mellott

>Does anyone from Delta monitor this website? I've sent several emails to the Delta Tech Support Group and can't get a response. My questions pertain to the 10" 2 HP Left Tilt Tilting Arbor Saw (Model 36-755). First, will the Delta splitter 1349941 fit this saw? Second, can you run this saw on a 20 amp circuit? The manual says that you should run it on a 15 amp circuit, but I don't know if that is intended to be a maximum or minimum. I don't know if the motor (model 82-010 which draws 8.3 amps at 220v) has overload protection built into it or not. I'd like to run it on a 20 amp circuit, but not if it's going to jeopardize the motor. Thanks for your help with this.

Re: Need Delta Technical Support

#2

20A circuit is fine

Mark Goodall - ATL - tooljunkie

>The circuit breaker is designed to protect the wiring in your house (from fires) not to protect your motor.

When they say 15A circuit, this is a minimum and you can run the saw on a 20A, 30A or even 40A circuit if you wanted.

If they said 20A then you could NOT run it on a 15A circuit.

I was the original poster of the Delta Splitter information and I can't say for cetain about your particular saw, but Delta made the splitter with two sets of holes so it would fit their contractors saw and their cabinet saws from 1930 (whatever) until present. So if your saw is made the same way they've made pt=retty much all of them, it should fit. They have made a few odd-ball saws over the years that were different dimensions.

If you can't contact Delta about this, and if no one here can tell you for sure, you can go to the Online DeWalt Service center and get all the manuals, etc for all Detla products and you might be able to determine if it fits from there.

Happy Woodworking!

Re: Need Delta Technical Support

#3

un answered email seems to be common

SanMan

>Ive had several out recently that go unanswered as well.

Why bother posting them if they wont be monitored or answered is my question? Makes little sense.

To me thats another aspect of customer service....gone bad.

SM

Re: Need Delta Technical Support

#4

Wonder....

Mark Goodall - ATL - tooljunkie

>The guys at the old Delta/Porter-Cable service centers (I've lived close to two in my lifetime) were always a great help, both in person and on the phone. I'm not sure if any of those people are even left after Black&Decker bought Delta and PC and merged everything into the Bl&D/DeWalt service center system.

Happy Woodworking!

Re: Need Delta Technical Support

#5

Re: Need Delta Technical Support

Steven Mellott

>FYI, It took several weeks, but I received a response on March 6. )Just wanted to close the loop.)