Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Price drop on over 1300 Rockler items

Staining Maple/Birch

Posts

Staining Maple/Birch

#1

Staining Maple/Birch

Mark McC

>I am making a leather coctail ottoman with turned legs and was planning on using a maple or birch.

The finish I want is very dark almost chocolate brown, to compliment the finsh of the other furniture in the room.

I am not too interested in bringing out the wood's grain patterns.

I considerd Walnut but it seems like a waste, (and more expensive) given thatI am not trying to feature the grain.

I have not had much luck consistantly staining maple in the past, especially getting to darker colours.

Any suggestions? Amaline dye? Gel?

Thanks

Mark

Re: Staining Maple/Birch

#2

Re: Staining Maple/Birch

Ray Binnicker

>A dye would be my initial choice.

However, have you considered Alder? It is a good solid wood, easy to work and probably easier to stain. It even costs less than maple.

Re: Staining Maple/Birch

#3

Re: Staining Maple/Birch

Dave Bair, Eaton Rapids, MI

>Can you get some maple heartwood? It's pretty dark in some cases and might stain better because of its greater density. It's considered less desirable than the white sapwood and costs less.

Re: Staining Maple/Birch

#4

Re: Staining Maple/Birch

Tony - Memphis

>I've had better luck staining poplar to look like something else. I normally use water based dyes. I think you can get maple or birch pretty dark with some dye. Nice thing about the dye is that you mix the concentration you want. I use the Lockwood dyes from Lee Valley. Homestead Finishing sells good dyes too. I have tried the TransTint dye and it works real well. It is a little expensive though. Glazing is a good way to play with color too since it sits on top of the wood.

Tony

Re: Staining Maple/Birch

#5

Re: Staining Maple/Birch

markfromsacramento

>I've had very good luck getting that dark brown with General Finishes Gel Stain "Java". It has a bit of urethane in it so it not only is very dark but it also gives you a nice finish after a few coats.

Re: Staining Maple/Birch

#6

Thanks, think I'll try dye!

Mark McC

>

Re: Staining Maple/Birch

#7

Re: Staining Maple/Birch

Pat Barber

>Shellac or lacquer that has been tinted

and a spray gun.

That's almost the only way to end up with

a decent looking finish.

The furniture plants have been doing it that way

for many moons.

Maple is not going absorb much color, so you

end up "painting" it with the finish.

Re: Staining Maple/Birch

#8

Roasted Birch

Darin in Victoria

>I've just heard of a product called Roasted Birch. Apparently, it looks like black walnut and highly rot resistant, but the price is only slightly higher than regular birch. The colour is entirely through the wood unlike a dye or stain so you can dent it :( and the inner colour is still the same as the outside. Kinda cool. I'm hoping to try it out sometime on a project.

Re: Staining Maple/Birch

#9

Re: Staining Maple/Birch

Dave in Haverford PA

>This isn't an answer to your question but I would choose mahogany over maple. It doesn't cost much more and it's one of the easiest woods to finish could save you a lot of aggravation.