Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

This is the most versatile work station you will ever use

PM 2000 Saw -Receptacle Information?

Posts

PM 2000 Saw -Receptacle Information?

#1

PM 2000 Saw -Receptacle Information?

John Halstead

>My Powermatic saw is in storage,out of state,and I am building a new work shop. The electrican needs to know the Receptacle Configuration that I need for the saw. I need your help. It is a 13amp. 3Hp 220V Pm2000 Powermatic table saw. Thanks

Re: PM 2000 Saw -Receptacle Information?

#2

Tell him the motor nameplate rating and *LINK*

Forrest Addy

>Tell him the motor nameplate rating and what type of receptacle you prefer, standard or twustlock. I suggest you use a four wire 115/240 arrangement so you can install a fused 115 Volt outlet on your saw for a router or other convenience. That's four wires including two line conductors, a neutral, and a ground.

The basic 230 only service using a straight blade receptacle can be served with a NEMA 6-15 or 6-20

If you desire a 4 wire service to your saw for the convenience outlet I suggest a NEMA 14-20

There are locking verions of these. Here's a link


Receptacles