Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Abingdon, VA – Tree Cutting & Portable Sawmill

paint trim before or after installation?

Posts

paint trim before or after installation?

#1

paint trim before or after installation?

Steve Silca

>Greetings:

I am redoing all the trim work in my new house - large plinth blocks, rosettes, wide casings, large baseboards, shoe, and chair rail.

Most of it is pre-primed. I will pre-prime the rest. My question is, is it a good idea to paint all the trim before installing it? This way, all I will have to do is caulk the nail holes and then do some touch up work with the paint once the trim is installed. What have been your experiences/preferences with this?

Thanks!

Re: paint trim before or after installation?

#2

Before!

Thomas Skaggs, Foothills of Mount Level

>Oh it's so much easier to do it before. Then, as you say, touch up nails holes later.

Tom

Re: paint trim before or after installation?

#3

Re: Amen!

Glenn Madsen near San Francisco

>And by pre-painting, you do more of it standing up, at the bench, rather than bent over, on hands and knees, cussing at the drips on the flooring that missed the drop cloth. DAMHIKT.

Re: paint trim before or after installation?

#4

I disagree

Doug in Denver

>I would prime but not paint first. First, if you are using a reasonable amount of nails, you will basically be painting most of it again anyway. If not, then you have touch up slotches on brand new trim. Second, depending on how picky yoou are about filling nail holes, if you fill them with a filler that you will sand smooth, fresh latex does not sand worth a darn, so then you have gunked up scratched paint sround your nail holes. I prime it, then install it, fill crackes where rosettes meet trim with caulk if necesary, fill holes with a sandable filler, spot prime the sanded nail holes, blue tape and paint.

Re: paint trim before or after installation?

#5

2 questions

Steve Silca

>What filler do you like to use?

Would it be crazy to prepaint the outside edges of the trim (so the top edge and bottom edge of the baseboard, the two outside edges of casing, the outside edges of the rosettes, etc.) first? Since these aren't going to receive any nails, if I painted the edges first at least I can avoid having to tape everything. What do you think? Then, after nailing and filling the holes, I would just need to paint the main area of the trim, but wouldn't have to worry about cutting in real carefully where the trim meets the walls.

I'm going to be doing about 8 full rooms so I want to do it right but not spend hours on taping/tarping etc. Not to mention the painter's tape cost big bucks! Thanks.

Re: paint trim before or after installation?

#6

That's basically what I do

J. Robison

>Hit those edges with 2 coats of color (sanding in between) and it works fine.

Re: paint trim before or after installation?

#7

Here's the answer

Lee Ohmart

>When I was in High School, my father built a house. It was a two storey colonial. My brother and I painted all the trim, doors walls and ceilings. Basically everything but the floors. This is why today I dislike painting. Anyway, at that time the paint we used was oil based alkyd enamel but, I don't see why the following would not work with latex. First, apply two coats to the uncut trim. Then cut it up and nail in place. Fill the holes using the crayon type hole fillers and smooth it out with your fingers. With a little practice, you can almost liquify it with rapid rubbing and make the hole disappear. It works best if you nail through relatively flat areas on the trim. Then apply a final coat. Blue tape? We didn't have no stinkin' blue tape back in the 70's. My perfectionist father made us use technique to avoid painting the walls. I will have to admit that because of his insistance on technique, I can paint out anything in no time flat.

Re: paint trim before or after installation?

#8

Re: 2 questions

Doug in Denver

>I tend to use whatever leftover Famowood I have from furniture building. I like it because it sands so much easier than other fillers. You could do the edge treament you describe, but unless your walls are dead flat, you may need to fill some gaps anyway. And even if they are, I like the finsihded look you get when the paint fills the tiny gap between trim and wall. It doesn't look like it was just nailed on.

Re: paint trim before or after installation?

#9

Re: Here's the answer

Doug in Denver

>We didn't have a lot of things in the 70s we have now, including blue tape. But I gotta say I'll tape any day over painting the trim 3 times.

Re: paint trim before or after installation?

#10

Re: 2 questions

Lee Ohmart

>The crayon type fillers we used I think were wax-like and actually came in various colors of paint or stain. Since the "blue tape" came out I've tried using it before painting. By the time I taped and painted, I spent about as much time as if I had just painted the whole thing with a sash brush. I've never painted the edges as you suggest so I can't comment based on that experience. I can say, however, that any time I've tried to paint a patch on a painted surface, I've never been able to feather it out so I can't see the border. Maybe I inherited a little of my Dad's perfectionism? Nahhhhhh!

Re: paint trim before or after installation?

#11

Re: paint trim before or after installation?

Jeff Hufsey

>Steve,

An oldtimer once taught me a good method to get spectacular results with painting trim if you have the option of installing it first. Assuming the trim is over a solid floor (doesn't work over carpet), put a strip of wax paper (I cut a roll into three smaller rolls) down under the trim when you nail it down. Fill your nail holes, sand them flush and then you can paint like a wild man. After the paint is dry, use a sharp razor blade and lightly cut the wax paper away from the trim. You won't believe how sharp the transition will be between the trim and a wood floor.

Wish I had as good a solution for trim already in place, I hate to tape!

Re: paint trim before or after installation?

#12

Gotta file that one. Great stuff. thanks

Dan Donaldson

>

Re: paint trim before or after installation?

#13

Painted vs. stained trim

Paul Dwight

>I always pre-finish stained-and-topcoated wood trim. I spread the long sections of trim out and spray them with my HVLP gun. It's very fast and I get much better results than I could applying stain and finish with a brush on trim that's already in place. About the only downside is that if you use a gloss topcoat, the nail holes show up as dull spots. I use a satin topcoat and rarely ever notice a nail hole.

However, for painted trim I almost always finish it in place. For me, the one advantage of painted trim is that I can caulk the joint between the trim and the wall and make it completely disappear -- but I have to be able to paint over the caulk, which means it needs to be finished in place.

With stained-and-topcoated trim, I paint the walls before installing the trim. With painted trim, I install the trim first; paint the trim, slopping paint onto the walls as necessary; tape off the top edge of the trim and then paint the walls.

Good luck! -- Paul

Re: paint trim before or after installation?

#14

The pros know...

Jason Roehl in Mulberry, IN

>I've been in a number of houses where the trim was painted, but not caulked to the wall. Looked like crap. To do it right and good, both the walls and the trim will have to be painted after the trim is installed and caulked.

Our painting process for new homes (assume vacuuming/cleaning):

-mask windows

-spray and backroll primer on walls

-sand walls

-spray 1st color coat in all corners, including upper corners

-spray/roll 1st color coat, making sure all corners are now fully covered

-mask walls in upper corners

-spray ceilings

(...trim installed...)

-spackle/sand/caulk trim

-remove all doors and stand in room centers tacked together at top in zig-zag manner

-mask off anything that doesn't get painted (cabinets, floors, windows, etc.)

-spray all trim and doors with 2 topcoats (prime first if not factory-primed)

-re-paint walls, sometimes we tape the trim off first and spray the cut (twice), sometimes not.

-touch-up after carpet-layers (they ALL do at least SOME damage...)

Once you're good at using a masker, this is a very efficient process for a very good finish everywhere.

Jason (Addy protocol: pro painter)

Re: paint trim before or after installation?

#15

Re: The pros know...

Gary Evans Tallassee, TN

>Hi Jason,

Just to show my ignorance to the world; what is a masker?

Gary

Re: paint trim before or after installation?

#16

Found a link... *LINK*

Jason Roehl in Mulberry, IN

>It's basically a hand-held dispenser that combines tape and paper or tape and plastic film. To us, they're worth 10x their weight in gold. (What we spend on tape, paper and plastic in a year probably gets into 4 digits).

I have 2 of these things myself, one with a paper blade, one with a plastic film blade. I'll probably get another one to hold another size of film. (24", 48" 72" and 99" film rolls are available; 6", 9" and 12" are common for the paper, automotive goes wider).

Jason


Masker