Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

ADVERTISE HERE - FREE TRIAL

planner depth of cut

Posts

planner depth of cut

#1

planner depth of cut

Tony O

>I have a Delta 13' table top planner. The manual states that depth of cut up of 1/8" in softwoods up to 6". Seems terribly aggressive to me. Routinely I'll remove 1/32 perhaps 1/16 maximum for that board width. Even less on the last few passes. Is this too cautious? Sure it takes longer but I figure less wear and tear on the machine and blades is worth the time.

Tony

Re: planner depth of cut

#2

naaaa.....

SanMan

>.....your getting the finish you want right?

Why push it...unless you like tearout?

SM

Re: planner depth of cut

#3

Re: naaaa.....

John Lucas

>I agree, I'm on my 3rd small planer and 1/8" will go but you don't get a very good cut. I do whatever is necessary and usually sneak up on the last few cuts.