Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

100+ Wood Species + Full-Shop Services: Lumber, Veneer, Tools & CNC. Everything in One Place.

PEN TURNING!!!!

Posts

PEN TURNING!!!!

#1

PEN TURNING!!!!

Snyder3179

>I am looking to get started at turning pens. I have been looking at doing this for sometime now. Now is the time I guess. It just looks like alot of fun, and would make great birthday gifts and such. I have been looking at Rockler and woodcraft and Grizzly has a small lathe and all the stuff to get me strated. Is grizzly stuff worth a hoot or is there someone you would recommend!!!

Scott S.

Re: PEN TURNING!!!!

#2

Jet mini...

Joe Pack

>The Jet mini is on sale all the time. I have the single speed (I only use fast for pens), but would now buy the variable speed that was not offered when I bought mine...Easier to change speeds for larger items such as bowls. At the same time, change the belt position on a standard Jet mini is just a few seconds, and you don't have to do it often. The Jet seems to be the lathe of choice for clubs demonstrating at the wood shows I have attended.

As for "all the stuff," don't buy into the idea that you need expensive tools like I did. I get just as good results with the $39 Harbor Freight HSS tools as with the Sorbys. In fact, my favorite tool for doing almost any "straight line" work is the 3/4" gouge from the HF set. Straight line work on a pen blank ain't brain surgery, and does not require a lot of expense, just sharp tools, and the HF set does just fine. In fact, I would recommend the HF HSS set for $39, then spend your money on a Wolverine sharpening setup and a Woodcraft 8" grinder. The whole shot can be had for about $200 if you look for sales. Sharp, not expensive, is the key for now.

For what it's worth, Woodcraft has a 10% off everything sale the first Saturday of March.

Re: PEN TURNING!!!!

#3

Re: PEN TURNING!!!!

Carol from AZ

>Jet mini.

And click on 'Turning" on the left menu here. Lots of pen turners there. Lots of help. Lots of talent to inspire you.

Re: PEN TURNING!!!!

#4

JET Mini - PennState for access..NM.

MountainMan

>

Re: PEN TURNING!!!!

#5

Re: PEN TURNING!!!!

ScottS

>I bought the Jet Mini; the cheap one without the variable-speed motor. Great lathe! Swapping the belts around to change the speed takes all of 2 seconds. I'm extremely happy with the purchase...

Re: PEN TURNING!!!!

#6

Re: Craft USA

Al Stokka - Cambridge, Iowa

>Craft USA (Utah) ( www.craftusa.com; www.woodturnerscatalog.com) has a pretty decent price on the whole setup for pen making. Lathe, chisels, finish, pen kits. I think the only missing part is sandpaper. I bought it with a multi-speed Jet mini. I'm not displeased but, if I were to do it again, I'd get the variable speed Jet. The multi- isn't bad; the varible is just more veersitile.

Al

Re: PEN TURNING!!!!

#7

Re: JET Mini - PennState for access..NM.

Robert Henderson

>pensofcolor.com sells penn state stuff but with lower price

Re: PEN TURNING!!!!

#8

Re: Craft USA

Matt Berry

>I have owned the jet mini for a couple of years now and absolutely love it. They now have the variable speed, which would be a little more convenient then changing belts (still not a big deal) Jet also has a new mini lathe coming out soon a 12 x 20 mini lathe. It gives you a little more length between centers, and a little more swing (Huge plus). You might want to wait for that to hit the market.

Another company who has great service and fast shipping on lathe products is packard woodworks (Recently Hosted the woodcentral and packard peppermill contest). Their website is http://www.packardwoodworks.com/

I also have a slight caution with Crafts supply USA, Their online checkout has suffered from having insecure items being displayed with the secured items. Which basically means that part of the information that you put in may not be encrypted (protected) while being sent over the internet. Just something to watch for.

Re: PEN TURNING!!!!

#9

Re: PEN TURNING!!!! *LINK*

Scott Greaves in Blackfoot Idaho

>Hi Scott!

Penturning is a blast! I highly recommend it! The recommendation for a Jet Mini lathe is a good one. Also the recommendation for Harbor Freight HSS tools. I would like to give you another recommendation, one that will give you everything you need to know about penturning, and that is the link to the International Association of Penturners (IAP). I've included it below. A nice bunch of people, ready to lend a helping hand. Have fun!

Scott.


International Association of Penturners (IAP)

Re: PEN TURNING!!!!

#10

Re: PEN TURNING!!!!

George Tamlin

>Snyder, Go with the Jet variable speed. I had a Grizzly as my first. It worked ok, but is limited. You won't go wrong with a Jet

Re: PEN TURNING!!!!

#11

Hey, Al,

Don Henthorn

>I disagree. The speed ranges are the same in both lathes. The vs isn't more versatle it is just a tiny bit more convenient.

Re: PEN TURNING!!!!

#12

Re: Hey, Don. I disagree, too.

Al Stokka - Cambridge, Iowa

>Don,

You're right. I used the wrong (misspelled) word. Not versitile; convenient.

Al