Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Abingdon, VA – Tree Cutting & Portable Sawmill

Cross Grain problem

Posts

Cross Grain problem

#1

Cross Grain problem

scottco

>I am building a top that is similiar to an old fashion basin stand. The solid wood top has two side splashes and a back splash. I am not sure how to connect the side splash and back slash, since my side will be in a gross grain situation. Can I just run a gooove and dado for the side and back pieces and glue it together? I can't seem to find any reference materials in either my home library or the net.

thanks in advance

Re: Cross Grain problem

#2

Re: Cross Grain problem

Keith Newton

>I'm not sure, but put dovetail on your list of things to think about. That would be a dovetail tenon, not fingers, and let the back and ends go a little below the bottom, might keep it form becoming too thin fragile.

Re: Cross Grain problem

#3

Re: Cross Grain problem

Ed Mulligan, Cape Cod

>The back piece can be glued directly to the top. The side pieces can be attached with screws in slotted holes from underneath the top. Attach the sides to the back with a couple of dowels.

Ed