drawer slides
Danny Penning--MO
>Can anyone recommend who has the best price for drawer slides? I'm
looking for the slides that mount to the bottom of the drawer side.
Thanks in advane!
Danny
Knowledge You Can Build On — Est. 1998
drawer slides
Danny Penning--MO
>Can anyone recommend who has the best price for drawer slides? I'm
looking for the slides that mount to the bottom of the drawer side.
Thanks in advane!
Danny
Re: drawer slides
JL
>Don't confuse best price with best quality. I bought some "inexpensive ones" to put on a set of drawers and I regretted it until I replaced them. Best quality are ones like the Accuride slides (Rockler has them). Blum is also supposed to be pretty good. If anyone knows of a place with good prices for those, I'd like to know also - I've got a lot of cabinets to build for my shop :).
Re: drawer slides
Barry Irby
>I bought some Knap Vogt (KV) full extension slides at Lowes for about $13 each. Later bought some that appear to copies made in China at Diamond Hill Plywood for $4. They "look" very similar in over all quality. The cheaper ones were not "handed". You just turned them upside down for one side.
The more expensive ones are doing well on the drawers on my lathe cabinet, except that sawdust and other crud gets in them and gives them a "gritty" feel. I blow them out with compressed air when they do. Can't really compare the others because they were on a piece of furniture that gets much lighter use and in a cleaner environment. Based on appearance I would buy them again.
Re: drawer slides *LINK*
James Dillon in MD
>Danny,
Try Rockler, Lee Valley, McFeelys, Woodworkers Hardware, Reid Tool, Cabinet Parts (link below). Better quality slides are going to cost a bit more than what you can get at the local borg, but are nicer IMHO. Good luck.
Re: drawer slides *LINK*
Patrick Capobianco
>I think this place has the best prices on slides.
http://www.cshardware.com/
Re: drawer slides *LINK*
Pat Barber
>Yeppp...these guys are pretty reasonable for the
retail crowd...
Woodworkers Hardware
Re: drawer slides
Jim in Lakewood, OH
>I've also had good luck with them, and, If I'm not mistaking, they are listed as a major sponsor of Woodcentral. I try to support our sponsors whenever possible.
Jim
Re: drawer slides
Carol from AZ
>Bought a bunch from these folks and put 22 drawers in my little 10x12 "shop" building.
Work fine and the price was fair.