Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Rare Exotic & Domestic Hardwoods, Milled In-House in Oregon. Browse Unique Stock.

Perfomax/Jet

Posts

Perfomax/Jet

#1

Perfomax/Jet

Ron Hildreth, Alta, Iowa

>Two weeks ago I drove down to Des Moines and picked up my new 22-44 Performax drum sander. The salesman at the Woodsmith Store told me that the one I bought would be one of the last ones that will be marked as "Performax", that the sanders now will have the name "Jet" on them. I knew Jet had bought Performax, but he also told me that Jet had sold the name, and sometime in the future we will be seeing low quality tools sold at Wally World! Imagine that!

Ron in Iowa

Re: Perfomax/Jet

#2

Re: Perfomax/Jet

Stuart Hough

>Yep,

You can see them on Ebay already. They look just like the no-name-i'm-scared-to-tell-you-where-it's-made tools. The only difference is that they are charging a price in between Craftsman and Delta, when it should be between Tradesman and ToolTown!

Re: Perfomax/Jet

#3

Not Only Wally World.........

Scott in Eastern Iowa

>.....but if you have a Menards closeby, they'll have 'em there too.

I looked a couple over real quick the other day.

Yup...I kept walkin'. All plastic and just looked cheap. No thanks.

You got that sander running yet?

Gonna post a review?

I'm looking at a 26" Delta or Steel City ...the just look beefier with the drum on two posts rather than on one.....dunno gotta convince myself I need it first.

Scott

Re: Perfomax/Jet

#4

Re: Not Only Wally World.........

Ron Hildreth, Alta, Iowa

>Hey, Scott!

Haven't heard from you for a while--

I LOVE my Performax, what little I've used it. I left the 80 grit on that it came with, and did a test with it on a wide piece of 3/4" oak ply, and it was spot on right out of the box. No ridge of any kind after running one side through and then turning 180 deg. and running through agian. Only adjustment I made was to the depth gauge, but that was minor. I then run a solid piece of 3"x 6" solid oak through that was 1/4" thick to start, and kept lowering the drum until I had the piece sanded down to nearly paper thin. I'm really amazed at how well it performs!

I looked at other drum sanders, too, but the 22-44 performax had much better reviews. A friend of mine in Rockwell City had one, and recommended it over anything else. I think he was right. Spendy piece of equipment, but I feel it was well worth the price!

Ron in Iowa