Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Price drop on over 1300 Rockler items

How to repair the finish on a wood floor?

Posts

How to repair the finish on a wood floor?

#1

How to repair the finish on a wood floor?

JohnR

>Hello...About 1 year ago, I installed old growth wide plank pine floors, which I stained and finished with a high density tung oil. The final two coats of tung oil were an "Antique Finish," which means that the final surface has a matte to semi-gloss finish.

A few months ago, I used Mr. Clean magic sponge (the white ones) to remove some adhesive from the floor. Without realizing it, I also removed the nice "Antique" finish, so now the floor has a number of shiney spots where I rubbed with the sponge. (The stain was not affected, just the final finish.)

My question is this: Does anybody know how I can dull down the shiney spots so that they more closely match the surrounding matte/semi-gloss finish? I tried using 0000 steel wool on the spots, but that did not help.

Thanks.

Re: How to repair the finish on a wood floor?

#2

Re: How to repair the finish on a wood floor?

mike mcnerney

>I'm not sure what's in the sponge but my guess it may have left some small residue? I would try a little warm water dampened cloth & when dry, lightly, steel wool, then more of your original topcoat. If the oil doesn't seem to stick maybe work down in grits, 600, 400

320, 220, then more oil, Just my best guess.

Mike McNerney in ottawa