Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Urban Salvaged Hardwood Slabs, Milled In-House from Rare Trees. Shop Unique Walnut Stock.

Router crosscut sled... *LINK*

Posts

Router crosscut sled... *LINK*

#1

Router crosscut sled... *LINK*

Norman (Ottawa, Ont.)

>I was tuned into building one of these after reading about them in a book or magazine. I went ahead and made one and am suitably impressed with the versatilty of this method of routing dadoes and end grain rabbetts or other rourt crosscut operations.

I posted a photo below. It's fairly easy to make, a bit of a learning curve to use, but the benefits are obvious right away.

Norman


Router crosscut sled...

Re: Router crosscut sled... *LINK*

#2

Re: Router crosscut sled...

Bill Hylton

>Looks really nice, Norman. I'm betting you read about it in PopWood # 133 (April '03), in the first "Power Tool Joinery" column PW ran. A different style--no bottom--is in the revised Woodworking with the Router .

Bill

Re: Router crosscut sled... *LINK*

#3

Re: Router crosscut sled...

Norman (Ottawa, Ont.)

>Thanks Bill! You've been an inspiration..

I like your books.

I can't find the issue you mention, probably before I began my subscription to PW. I dug through a pile of magazines here and found the reference however,,, Better Homes Workshop Projects 2002. The entry on Pg. 111 provided the seed for this sliding table.

Also, wanted to mention that this type of jig is ideal for routing small, narrow parts.

Once again, thx ..

Norman