Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

100+ Wood Species + Full-Shop Services: Lumber, Veneer, Tools & CNC. Everything in One Place.

Bench top table saw recomendations

Posts

Bench top table saw recomendations

#1

Bench top table saw recomendations

Alan Tolchinsky

>HI All,

I'm looking for one of these. Do you have to buy the $500 Bosch to get a good one? That's out of my price range so I'm asking for other recommendations. I want a decent fence that stays locked if that's possible. I've seen a Jet table top for around $200 on Amazon. Anybody have this one or any other one they like?

Re: Bench top table saw recomendations

#2

Re: Bench top table saw recomendations

Carol from AZ

>I think bench top table saw and decent fence may not belong in the same sentence, let alone on the same tool. :)

But then my experience with this is more than a few years old. I used a benchtop that I built into a cabinet to which I mounted a Biesmeyer fence. Used that for over a decade. But I lusted for more power and better bearings, and eventually got myself a cabinet saw.

If my budget was as tight, I'd look for a gimme or near-gimme in the local yard sales and such. Then I'd spend my frugal bucks on a decent fence. Biesmeyer clones can be had inexpensively. Then think in terms of making a cabinet to mount the fence to, and place the saw behind it, squaring it to the fence.

My 2 cents. The good fence is far more critical than the saw.

Re: Bench top table saw recomendations

#3

Carol is giving good advice

Neal in San Jose

>Many years ago I had a small (8 1/4 inch) Makita, and while it cut everything I asked it to, the fence was always a worry. I borrowed a friends deWalt (sorry, don't know the model number), and while the fence was head and sholders better, it still was not in the league of a good "T" square fence. Portability is the ONLY reason I can think of for buying one of these.

Shop around, and find a used contractor's style saw. Junk the factory fence and add a good fence. You should still come in at a decent price, and the tool will be MUCH safer and more accurate to use. HTH Neal

Re: Bench top table saw recomendations

#4

Re: Bench top table saw recomendations

wcandres

>I needed a benchtop table saw a while back (space limitations) and picked up the Bosch with the older folding stand (not the new one with the wheels). I don't use the stand, anyway. I've not regretted this purchase. Having ripped a good deal of various hard and soft woods, I've found this purchase was right for me. The fence is great. It doesn't move (even when ripping soaking wet "treated" 4x4's). I do use Freud blades (makes a huge improvement). The saw is costly (for a benchtop tool), but I wouldn't have any other.

Re: Bench top table saw recomendations

#5

Re: Bench top table saw recomendations

Glenn Madsen near San Francisco

>Table saws are regularly sold in the $250 range, in the email postings from our woodworkers' club. There may be a similar activity near where you live. Rather like The Island, only analog.

The beauty there is that folks get together and share the use of tools, which one person can't store or afford themselves. And hobby folks are often learning where they are going in their skills, and end up with gear for which they no longer have need or space.

Want a very affordable Shopsmith? ;-)

Re: Bench top table saw recomendations

#6

Depends on your needs

doug f, san clemente, ca

>Alan - I just picked up a Bosch 10" table top for $50 from a local tool listing. We're using it as a job-site saw to install a bunch of hardwood flooring and kitchen cabinets.

While the saw functions well for this use, I'm not sure I'd recommend it for cabinet making. The fence is "ok", but a bit flexible. The saw is difficult to align (blade to miter slots). But my pet peeve is the lack of a LARGE off switch. I've had occasion to hunt for the switch while I'm still holding sawn wood and it's enough to satisfy your cardio workout for the day!

Lots of good advice above on saving up for a used cabinet saw, probably in the $200-$300 range for a first saw. Use it, see if you like it, sell it for about what you paid and move up to a cabinet saw; you won't regret it.

Have fun with your project.

Doug

Re: Bench top table saw recomendations

#7

THANKS EVERYBODY!

Alan Tolchinsky

>I appreciate all the good information given here. I'm checking Craig's List and the local paper for a used CS. I think a poor quality fence would drive me crazy so I'm taking your advise to heart. Thanks again.

Re: Bench top table saw recomendations

#8

Re: Bench top table saw recomendations

Larry Clinton At Frankfort (Central)., Indiana

>Alan, I find many table saws at estate auctions in the central Indiana area. Many are the old Craftsman saws with legs and the motor hanging out the rear. I purchased a couple of these in good working order for $5 & $10 - $15 total and came with a variety of blades! These were the 1940's ~ 60's models with 1/2 or 3/4 hp motors. I gave one to my youngest son for use remodeling his house, think I gave the other to a friend. Actually my son didn't use his as he does almost everything in my shop and carries it to his house. These are pretty good saws with mediocre fences. If you have the room for this type saw, I would look around at local auctions in your area. I think the highest I have ever seen bid was around $75. With the almost free saw, you could add a good fence and have a decent tool. I know my son would give you his if you were in this area! It has some surface rust on the table now as its stored in an unheated shed but otherwise in good shape.

Re: Bench top table saw recomendations

#9

Re: Bench top table saw recomendations

Alan Tolchinsky

>Thanks Larry, I'll check that out locally too. Alan