Broken pot metal knob-- any hope of repair?
Dave Morris
>One of the pot-metal adjustment knobs that hold the table on this old Jet bandsaw is broken. It has four little "balls", about 1/2" in diameter, at the end of a small "neck" about 1/4" inch in diameter, arranged around the body of the knob so your fingers can grip the knob to tighten it. One of the balls is snapped off at the neck where it joins the body of the knob. I have the broken-off ball/neck, and it's a clean break. Yeah, the knob still functions, but strictly for appearances, I'd like to repair the knob. Unfortunately, this cool-looking old style knob isn't available any longer from Jet as a replacement part.
So what is the best stuff to glue these two pieces back together? JB Weld? Epoxy? Some other kind of space-age two-part ethyl-methyl wonder-bond that I'm not aware of?
Searching the net turned up several threads on different forums about repairing pot metal, but not one of them ever said what finally worked. I did see one product from Caswell Plating that claims to be the bee's knees for pot metal:
http://www.caswellplating.com/aids/solderit.htm (hope I'm not breaking any rules posting this link) Anybody ever used this stuff?
Open to suggestions. I can still fogettaboudit and just use the knob as is, but it'd be nice to fix the knob if possible. I just don't want to use the wrong stuff first and screw up the chance to use whatever product would *really* work in this situation.
Dave-- trying to find the line between "functional" and "just for pretty" in this tool restoration




