Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Good Hope Hardwoods - Walnut Slabs & Specialty Hardwood Lumber

Lubricating SkilSaw question.

Posts

Lubricating SkilSaw question.

#1

Lubricating SkilSaw question.

Barry Irby

>I have an old Black & Decker Builder's Sawcat left over from when I was a builder. It is probably thirty five years old. The big black plastic knob on the front that locks the depth adjustment just fell apart. It had a captive 3/8 NF nut in it. I'm in a hurry, so I glued it back together with epoxy. Any chance that will work?

One reason it failed may be that I have not greased the skids as well as I should. Any advice on what to lub the slides and pivots in it with?