Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

100+ Wood Species + Full-Shop Services: Lumber, Veneer, Tools & CNC. Everything in One Place.

Melamine bookcase?

Posts

Melamine bookcase?

#1

Melamine bookcase?

Ron, Eugene, OR

>I'm contemplating building a bookcase for WW magazines for the shop using particle board with Melamine on both sides - the stuff at the local home center. The plan would be to dado the sides to glue the shelves into, maybe add a couple of screws too.

1) does this materail seem practial for the shop?

2) considering magazines weigh about 20 pound per running foot what would you recommend as max length for shelf?

TNX in advance -

Re: Melamine bookcase?

#2

Re: Melamine bookcase?

Steve Roxberg

>I have built two of them and they work great. Mine are 8' tall and I used the 12' wide boards that come predrilled for shelves.

The shelves are about 36 inches wide and I had to support the bottom of each shelf with a strip of Oak, but they look good.

drop me an email and I'll send you a photo of them.

Re: Melamine bookcase?

#3

Re: Melamine bookcase?

Mark McC

>NO problem IMO but some support or doubling up thickness is a good idea as the particle board will deflect under load as will solid. Maybe just under less load.

Mark

Re: Melamine bookcase?

#4

Re: Melamine bookcase?

ScottS

>I have three 30" wide melamine bookcases. The shelves are 12" deep and sag significantly if they're loaded with magazines or heavy books. I'd recommend reinforcing the shelves with a strip of hardwood or melamine if you're really planning to load them up...