Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Support WoodCentral when buying things you need

WC Weekend Accomplishments.....

Posts

WC Weekend Accomplishments.....

#1

WC Weekend Accomplishments.....

Dennis E. Peacock

>Good Morning Everyone,

I hope all of you had a good weekend.

Besides working the day job and keeping things afloat there, it primarily keeping everyone in the family at the doctors office. Flu, walking pneumonia, sinus infections, cold......in a way makes me wish for warmer weather, but I like the cold weather because the hot season is so long here.

Now that I have two teens in the house, my oldest is turning 17 next month and my daughter turns 16 in July, presents a whole new perspective for me on life and dealing with issues at home. I find it interesting that the bickering and arguing and such at home isn't much different than the stuff that goes on at work (my day job). I've stated several times that people at work act like a bunch of grown up 4 year olds. And I STILL say that today.

Due to me being sick for the last 2 weeks hasn't presented any real healthy attempts at working in the shop. So it's primarily been working at home for the day job or just taking medication and sleeping.

I do plan on getting back out in the shop today, for the first time in almost 2 solids weeks. It's gonna feel good to get back in the shop.

I hope that this finds each of you doing well.

So, what did YOU do this weekend?

Best of weeks to you all.

Dennis

Re: WC Weekend Accomplishments.....

#2

Re: WC Weekend Accomplishments.....

David Hay @ Denver

>This weekend I was able to get the remaining pieces of the built-in bookshelf baseboard sanded. Then I stained and started applying coats of finish. Hopefully, in a couple of weeks, I'll be able to scribe and install the stuff!

David

Re: WC Weekend Accomplishments.....

#3

Yet More Cabinet Work

Mike Fitterling

>Finally delivered the black walnut doors, drawer fronts, and end panels for the wall and peninsula units in the maple and walnut kitchen. 48 pieces so far. Here's a pic of a couple after the last coat was on. Finishing schedule was 2 coats of dewaxed garnet shellac, wet sanding with 400 grit, two coats gloss lacquer (Deft), wet sanding with 600 grit, final coat satin lacquer (Deft again) all applied with a conventional HVLP gravity fed gun.


img

Re: WC Weekend Accomplishments.....

#4

Re: WC Weekend Accomplishments.....

George@Colonel's Workshop-Havertown PA

>Good Morning Dennis and Happy Monday,

Lots of things going on here. My wife and I drove up to Kutztown University to retreive my #7 son Jim for a President's Day weekend home. Interstate 78 was still closed, so we took a back road and had little trouble. Later, I did more work on the two night staands for our new bedroom suite. Sunday I bid goodby to my wife at 30th Street Station in Philadelphia. She went tto Silver Spring MD to help #2 daughter, who is scheduled for a C-Section/#10 grandchild today. Grandma will tend her to boys, aged 2 and 4 while Dad camps out at the hospital for a couple days. After dropping off my wife at the train, I came back to the shop and did more work on the night stands. TV dinner last night.

George

Re: WC Weekend Accomplishments.....

#5

Well...

Mike in Paradise

>Last week I cleaned up my chainsaws using Lee Valley Sawblade cleaner and goo-gone

Before:


After: (Just for Grins I dressed them in matching bars that I got a steal on on ebay (4 bars, 4 chains, shipped for $56.00)


I am debating on taking my dual drum sander out of the shop and putting it out at the future shop at the woodlot as I just don't use it. So I cleaned up the snow around the back doors and enough of a path to be able to back the wood hauler up to them. I might even sell it.


But mostly I just laid around... I am the brown one on my back!


img

Re: WC Weekend Accomplishments.....

#6

A Night Stand - No sanding (almost) PICS*

Chet Kloss from Livonia, MI

>I built this night stand used a Lie Nielson 4 1/2 with the High Angle Frog to do all the smoothing. I found that the plane really revealed the grain of the top.

The table is a simple shaker design with hand cut dovetails on the drawer. I left the table exposed to sunlight for over a month before finishing it. I used David Marks Seal-a-cell & Arm-a-seal method to finish it.

Here's the top


Here's the drawer


,,,,,,,,,,,Chet

Re: WC Weekend Accomplishments.....

#7

Re: Opps screwed up the html - here's the pics

Chet Kloss from Livonia, MI

>Top


Drawer


,,,,,,,,,Chet