Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

A55 Smoothing Plane

drum sander info needed - again

Posts

drum sander info needed - again

#1

drum sander info needed - again

Carol from AZ

>Apologies for my bad memory. Last fall we had a discussion going on shop made drum sanders. Someone offered a suggestion on a certain kind of plastic pipe municipalities use that would make a good drum.

I lost that information. Anybody remember?

Re: drum sander info needed - again

#2

Re: drum sander info needed - again

Barry Irby

>Carol, I saw your post this morning and did not know the answer. Here it is evening and I still don't know the answer. I just thought I would give you that fleeting moment of hope that someone had answered your question. A little warm fuzzy but useless hug for your forlorn post.

I imagine the pipe was PVC, but I don't know. The drum in my Performax is aluminum. I don't know why. Easy to mill? Light in weight? Dissipates heat well? Municipalities MIGHT have some abandoned spun aluminum light poles, but I think they would be tapered. You would have to have them turned true by a machinist, if they are thick enough, unless you wanted to sand in circles.

Re: drum sander info needed - again

#3

Re: drum sander info needed - again

Carol from AZ

>Thanks, Barry,

It is always nice when someone remembers another is waiting to be noticed.

I spent 30 minutes or so searching the archives last night, but we hijack threads so readily around here, that it makes the usefulness of searching sometimes a futile exercise.

I am probably not asking my question in a way that triggers one's memory. I do remember being told that municipalities use a heavy walled plastic pipe, maybe for sewage, and that it would make an inexpensive drum, if I could find a cut-off.

But your post did lift my spirits. Thanks.