Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

200+ woodworking book reviews

Cabinet conundrum

Posts

Cabinet conundrum

#1

Cabinet conundrum

Mike Johnson - Chicago

>In building an arts and crafts built-in entertainment center (book case on each side of fireplace, TV above), I was looking to save some time...

So, I order some pre-built cabinets from kitchen cabinet company that I'll not name (a good deal, as I was able to order them unfinished). I figured that I will be able to "just trim them in place" and they would look fine.

Well, I accepted the cabinets about 5 months ago and they have just been sitting in the garage, while I've been working on other "renovation" projects. After finally getting around to finishing them (stain + poly) this past week I brought them in the house to begin fitting for trim.

BIG BUMMER...the cabinets were supposed to be a "custom depth" (18") and the are "standard depth" (12")!

I don't know how I did not notice until now, but I've clearly gone too far to try and go back at the "wrong shipped order" and I'm now trying to determine the direction I'm going to take to fix it.

The 2 options I'm thinking about are:

1) Remove the stained & finished face frame from the case, make a new case and attach face frame.

2) Remove the back and "extend" the four sides. To hide the seam, I was thinking of putting in a veneer over the thermofoil.

Either way, I still have to make shelves

I shouldn't grouse too much as the price I paid would normally only buy the doors. Not a deal but still a bit of a time saver...

BTW, anyone know where to buy thermofoil in the Chicagoland area? That would atleast avoid another round of finishing.

So, would you pick option 1 or 2? OR do you have an option 3 to suggest?

Thanks for your opinons,

M.J.

Re: Cabinet conundrum

#2

Re: Cabinet conundrum

Clint Searl, at the base of Haycock Mtn

>You'll never be happy. Relegate them to permanent garage storage and scratch build the correct ones.

Clint

Re: Cabinet conundrum

#3

Jim in Burlington Ont.

How do they look?

Jim in Burlington On

>I prefer recessed cabinet's around a fireplace. If they don't look good I'd just save them for another room and order what you wanted in the first place.

Re: Cabinet conundrum

#4

Sorry, no help, but I'd like to see it

Craig Daymon

>Mike,

I'd be very interested to see it when you are done. Please post pictures.

I'm looking to do pretty much the same thing, but I have to move the back door to the kitchen and install some shorter windows first. (Which means the kitchen will need to be budgeted as well.)

There is a great Greene and Greene mantel in the Fine Woodworking, "Built-in Furniture" special issue that I was going to base mine on...except the white oak. I thought I'd design a G&G frame above the mantel for an LCD TV (yeah, HDTV and all that) with enough space below for the center channel speaker. I'm trying to think of a way to frame it such that I can adjust, within reason, for different width/height displays and allow for ventilation. Lots of budgeting first.

Anyway, I'm very interested to see your approach. Good luck with the cabinet issue. Probably more work than building new ones, but it's the back of the cabinets that you would be extending an additional 6 inches, so you might be able to knock out the back of the cabinets, add an additional 6" to the depth with a frame and install some deeper drawers if necessary.

-Craig

Re: Cabinet conundrum

#5

Option #3

Craig in Silverdale

>If you bought those at one of the box stores, take them back. I used to work at home depot. You'll have to ask to talk to the manager to get the final decision most likely. If they are the wrong size there may not even be any questions. I saw a paint sprayer returned after about six months and it looked like it was used hard and put away wet. The customer said it didn't work any more and we took it back. Anyway, no harm in trying.