Re: Colt issues
Joanne Adler in Pt. Pleasant, PA
>I have used mine to mortise out for small hinges. I suppose it would be handy to have a clear base. I wonder if I can make one. I haven't even noticed if the one on there is removable.
The spindle lock and button used for bit changes is not the greatest design. I have gotten mine to work okay and I don't usually have a problem, other than banging knuckles or something. I did have a problem with the router body slipping in the base, but I tightened the screw on the clasp/lock and seem to have eliminated that trouble.
I've used mine for hinges, roundovers, chamfers, cutting mortises for tabletop buttons, grooves for panels, and a little assistance clearing some of the bulk in doing handcut dovetails. Yeah, I know, this is cheating a bit, but it saves on sharpening my junky chisels more often and is easier on my arms than the paring and pounding of hand-chopping pin and tail waste. I'm sure I've used it for something else, but these are the main things I've done with it.