And the new planer cart
Stephen Kirk in Quakertown, PA
>And now here is the new stand. Basic plywood tongue and dadoe construction, with doubled up support on the sides and a double thick base. I used some old pine as edge treatment, then threw on a couple coats of gloss poly for good measure. The castors or Woodcrafts 3" double lock swivels and with all four locked hold it in place nicely. Now I can easily move the beast around the shop as needed. I still have to make the center drawer and the outfeed support, but I have some other projects in the way. The plan was from the latest Shopsmith. All in all, two partial weekends to put it together, maybe about a $100 in cost (hey, $60 went into the castors)
