Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Identify and use hundreds of woods

Unifence - shorter length

Posts

Unifence - shorter length

#1

Unifence - shorter length

Norman (Ottawa, Ont.)

>I like the fact that I can slide my Unifence back for cross-cutting to length. I usually move it to just ahead of the blade. Problem is, it's a 43 in. length and gets in the way when moved back this far. The measurement system on the Unifence is very accurate, so I don't want to add a piece of wood to the fence itself .. I much prefer to slide the fence back.

Are there any aftermarket suppliers for shorted lengths 24-30 in.

of aluminum Unifence?

Norman

Re: Unifence - shorter length

#2

Re: Unifence - shorter length

Ray Newman

>@ one time, Delta marketed a 12� fence for the purpose you expressed.

I just looked @ the one that I have & couldn�t find a part #.

You might try calling Delta & see if they still market it or something similar.

Or, even call the local Delta service center & see if they have a damaged Unifence that you could purchase & cut down.

Re: Unifence - shorter length

#3

Re: Unifence - shorter length

Keith Newton

>the part number you need is 34-878. It is about $30 from amazon

Re: Unifence - shorter length

#4

Re: Unifence - shorter length

Norman (Ottawa, Ont.)

>Thanks Keith.

This is what I'm looking for.

I'll ask around to a couple of Delta retailers this coming week, now that I have a Part No.

I pasted the description from Amazon here as it is

exactly what I need it for:

From the Manufacturer

Making repetitive cut-offs with the Unifence is simple since the fence body can slide back, allowing the workpiece to clear the fence before contacting the blade. However, this causes a substantial portion of the fence to protrude from the front of the saw, an inconvenience during production runs requiring repetitive cut-offs. To solve this problem, Delta offers this 12-inch cut-off fence which will allow repetitive cut-off operations without the fence body getting in the way. Made of extruded aluminum with mounting channels for quick set up. Includes one cut-off fence.

Norman

Re: Unifence - shorter length

#5

If you want to trade...

Paul Cates - Henderson, KY

>You probably want to keep what you have, but if you'd like to trade I'll gladly trade mine (it's 33.5") for a longer one. Anyone know where I can get a longer Unifence?

Re: Unifence - shorter length

#6

Re: If you want to trade... *LINK*

Woodenfish

>The Uni-T fence looks interesting. Anyone own own?


Uni-T fence

Re: Unifence - shorter length

#7

I do!

Dominic Greco in Richboro PA

>I bought one of these several years ago and installed it on my Unisaw. Since that time I have had no complaints.

Dominic

Re: Unifence - shorter length

#8

I do too...

Paul Cates - Henderson, KY

>but the UHMW part of it was not straight, so I cut off the end. Wish I had contacted the place where I bought it instead, but I didn't. Now it sits idly on top of my cabinets...someday, maybe, I'll make a wooden insert to take the place of the UHMW piece.

Re: Unifence - shorter length

#9

Dave Hughes owns Peachtree, and he is.............

Art Silva

>a stand-up guy. Call him and explain your problem.

Re: Unifence - shorter length

#11

Bill Blasic

Re: If you want to trade...

Bill Blasic

>Thanks for posting that link, I showed my wife the fence part and she said if it is good then you should buy all the parts. So 1 43" with all accessories is on the way. Love that woman!