Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Want Better Milling & Firewood Knowledge?

Two piece drill bits; drill two diameters at once?

Posts

Two piece drill bits; drill two diameters at once?

#1

Two piece drill bits; drill two diameters at once?

Sue McLam in Orange, VT

>I have a potential need to drill a lot of holes that need to have a hole within a hole, both at a specific diameter; 1/4" and 5/8" probably. Is there such a drill bit that will do this? I would have to be able to control the depth of both holes and would want to do this using a drill press.

Thanks,

Sue

Re: Two piece drill bits; drill two diameters at once?

#2

Yup, they are available

Ray Thompson - Middletown,IN

>Check the usual sources, McMaster-Carr, MSC, Grainger, Enco. Don't know if they have the specific size you are looking for but if they don't tool shops can grind one for you.

Ray

Re: Two piece drill bits; drill two diameters at once?

#3

Re: Two piece drill bits; drill two diameters at o

Keith Newton

>Sue, Ray has given you some good sources, but you may want to type in step drills. If that is not it, it will be on the next page.

Re: Two piece drill bits; drill two diameters at once?

#4

Ellis Walentine

Not only are they available...

Ellis Walentine

>...but you can even get the minor diameter bit as a movable insert inside the major diameter bit, so you can vary the difference in depth. I'd talk to a local professional cabinet shop and find out who they get their custom tooling from.

Ellis Walentine, Host

Re: Two piece drill bits; drill two diameters at once?

#5

where to get

bill tindal, E.TN

>there is a place in Morristown TN that makes these in any size you want. I have used them and they do fine, especially if the larger diameter is a good bit larger than the small diameter like your case. I can't remember the tool company's name, but if you can't find the source email me and I know how ot get it. Or call Misenheimer in Morristown and ask the person who answers the phone, likely Dave Purkey, for the phone number of the drill bit company in Morristown. 423 587 4300

Re: Two piece drill bits; drill two diameters at once?

#6

Thank you!

Sue McLam in Orange, VT

>Thanks all. I did a google search yesterday and didn't come up with anything. I'll focus more on the leads that you all gave me.

You all are great!

Sue

Re: Two piece drill bits; drill two diameters at once?

#7

Much Cheaper Source.

Garrett in Victoria BC

>Boeing uses these drills by the thousands, and then resharpens and sells them to jobbers. Far less expensive than buying new, yet they still have plenty of life in them. I know KMS Tools has them - www.kmstools.com - best to phone their 800 number.

Cheers, Garrett