Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

This is the most versatile work station you will ever use

OT - Cleaning up phone and Cable wiring

Posts

OT - Cleaning up phone and Cable wiring

#1

OT - Cleaning up phone and Cable wiring

Mike in Paradise

>Ok a 4 year old project finally completed.

Here is a before and after picture of the phone and cable wiring in this house. I have been meaning to do this since I bought the house and finally got fed up enough with the wiring mess to clean it up and to track down and label each wire.

Found out that there must be some hidden splitter somewhere in the wall for several cable connections. I was trying to fix some constant Cable TV problems and even put terminators on all connections. It is much better but I still have an issue with an on-air channel interfering with a cable channel that my cable company tells me is just a problem in some areas.

I could not believe how many phone wires were going directly into the demarcation box. They wouldn't even fit properly. Once when the phone guy was in I asked him about it and he said that is how it is done and they have nothing to do with how the house is wired anymore.

Much cleaner now and I know where all the wires go(well almost , I couldn't find the jacks for two of them but I know some of the cat 5 jack have phone wire in them and I didn't want to pull out all the cat5 jacks to find those as I am not using them.


img

Re: OT - Cleaning up phone and Cable wiring

#2

Re: OT - Cleaning up phone and Cable wiring

Rod Peterson -- Ormond Beach

>One of the advantages of doing a remodel the way I did (having several walls open to the studs, and doing a lot of work in the attic) is being able to rip out the daisy chained CAT 3 phone lines and pulling CAT 5 home runs every place I thought I might someday need it. I actually pulled a pair of CAT 5s to every location, thinking both phone (and DSL) and network. I did home run pairs of RG-6 (TV coax cable) to all the likely locations for TV as well. Most of the time I ran RG-6 and CAT 5 to the same locations.

I terminated all the wires in a “geek box” in the shop. I used a 66 punchdown block for the CAT 5s, and splitters/connectors as appropriate on the RG-6s (many of the RG-6 cables are unconnected as there just isn't any need for more than three TV connections at this point). The unconnected wires sort of just hang in the box, but with the door closed, it looks great. It works great whether the door is open or not.

I went one step further and ordered a DSL splitter and installed it in the box, too. Then I brought a CAT 5 line in from the demarc box to the splitter and brought the brown pair of CAT 5 to the 66 block as the DSL pair and the other three pair connect to the 66 block in the regular way for POTS (I use the upper half of the 66 block to distribute POTS and the lower half to distribute network). Consequently, I have DSL capability at every phone jack location (I split out the brown pair to a separate RJ-11 jack for the DSL modem) with no need for individual filters.

Doesn't it feel great to get some organization in your phone/video/network distribution? By the way, eliminate as many splitters as you can, because each one of them cuts your signal in half (or worse), and it's additive.

Rod

Re: OT - Cleaning up phone and Cable wiring

#3

Re: OT - Cleaning up phone and Cable wiring

Johanna

>looks much better! How about helping me clean up the wire mess under the desk?

Re: OT - Cleaning up phone and Cable wiring

#4

Re: OT - Cleaning up phone and Cable wiring

Glenn Madsen near San Francisco

>We did a bunch of that over the last 8 or 9 years we've been here. It's amazing how much change there is in the way things get rewired, even when you think you've planned ahead, run plenty of the expected cabling, and done what the geeks tell you. And I'm a geek, with sons for geeks.

The biggest challenge we're run into os the changing of all of the technologies in the house over that time. I read what Rod posted, and agree that it makes/made sense, but there are a bunch of ways to get it done. I settled on a router-based network distribution scheme for data, and that's worked well, as the firewall and services equipment has changed over the years. When stuff melts, or gets upgraded or changed, we just replace the offending cabinet.

I wish the voice changes were easier. Don't start me on the satellite signal distribution issues, either. At least the signal is great!

Nice work on the cleanup, and may it stay clean for at least a couple of years.

Re: OT - Cleaning up phone and Cable wiring

#5

Are you sure..Here is under my desk! 

Mike in Paradise

>


img

Re: OT - Cleaning up phone and Cable wiring

#6

Re: Are you sure..Here is under my desk!

Johanna

>Oh, well, it was a thought! Actually, I have purchased some little plastic thingies that will be screwed to the underside of the desktops to carry the wiring. It would have already been done but I did not have any small pan head screws -- umpteen kinds of screws, but none that worked. C'est la vie!

Re: OT - Cleaning up phone and Cable wiring

#7

The trouble with tidy wiring...

John in New Mexico

>is when you need to change something its an even bigger pain to un-do all the neatness ;).

John