Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Nearly 100 Exotic Wood Species, Direct-Imported Since 1972. Shop Slabs & Turning Stock.

OT I am Cheap but I need some info *LINK*

Posts

OT I am Cheap but I need some info *LINK*

#1

OT I am Cheap but I need some info *LINK*

Dustmaker Mike

>Ok I said it I am cheap I hate to pay full price and if it is not on clearance I just walk by it.

Now here is where I need the help. I have a 2003 Explorer with power everything but seats. They could have put them in for me for a $1000 more but I said no. Well I was surfing the net the other day and found these 6 way electric seat bases and figured that I could put the electric seat in myself and save a few bucks. Anybody ever try this? Seems straight forward they match the base to the applacation so besides running 12 volts to control them anything needed?


Seat Base

Re: OT I am Cheap but I need some info *LINK*

#2

Re: OT I am Cheap but I need some info

Ray SW Ohio

>Your Explorer may aready be prewired for the seats too.

Re: OT I am Cheap but I need some info *LINK*

#3

Re: OT I am Cheap but I need some info

Grant Smith

>Generally speaking, vehicles are wired for all of the options regardless of the trim level originally purchased. I'm sure there are exceptions, but if your vehicle has power windows, you likely have the wiring harness in the the doors for the controls already. I'd look beneath the carpet (might have to remove the seats to see).

I'd look for the wiring before you buy the seats. Also note that you can likely remove the needed parts from the seats you buy and install them on your seats (seat covering included). That way you won't have the wrong colored seats.

Regards,

Grant in Iowa

Re: OT I am Cheap but I need some info *LINK*

#4

Re: OT I am Cheap but I need some info

Glenn Madsen near San Francisco

>Well, sometimes the manufacturers use some different types of connectors. The tool set of 'security Torx' drivers needed to pull the seat base of my 1999 GMC truck wasn't cheap, or locally available. My neighbor, who drives for one of the tool companies, didn't have them, nor had he ever seen them in that size before.

Of course, the dealer had the tools. The charge was something over $500 for the assembly, because they didn't replace just the broken $1 link, but all of the motors, wiring and other stuff, in one swell foop.

Sometimes, it isn't worth the digging. I crammed in a paperback book, and don't have 6 way adjustable seats any more. 4 way still. ;-)

Re: OT I am Cheap but I need some info *LINK*

#5

Dale Lenz

Re: My son, the Ford Mech..

Dale Lenz

>said it "should" work as long as you know how to wire them up, assuming switches etc comes with the new items you are buying. He has never done what you are attempting, only his best guess. Dale

Re: OT I am Cheap but I need some info *LINK*

#6

Why not go to a boneyard?

Eddie Pacheco, San Jose, Ca.

>I'm sure there have been plenty of fully loaded Exploders wrecked in the past 4+ years that you could get the seat mechanisms off of. I think you will also need some door panel parts as I believe they had a memory feature. This would ensure that everything fits.

Re: OT I am Cheap but I need some info *LINK*

#7

I have been to the boneyards

Dustmaker Mike

>the ones around here are up to 1999. Anthing newer they do not have there is a market to buy the whole truck no matter the shape and slavage the parts for the autobody shops. If I had a dealers licences I could buy at least 4 of them all the same interior.

Thanks

Re: OT I am Cheap but I need some info *LINK*

#8

Re: I have been to the boneyards

Paul Cates - Henderson, KY

>"the ones around here are up to 1999."

How about trying the online used part sites? I had good luck finding a right rear axle for my '98 4-Runner about a year ago...there were none within at least 100 miles of me at the time.

www.junkyarddog.com

www.car-part.com

HTH

Re: OT I am Cheap but I need some info *LINK*

#10

ooops, wrong year

Mark Goodall - ATL - tooljunkie

>

Re: OT I am Cheap but I need some info *LINK*

#11

'01 - any better? *LINK*

Mark Goodall - ATL - tooljunkie

>I wonder if a 2001 would fit. I can't remember when Ford make the big overhaul to the Explorer, wasn't it in 2000 and then 2006?

Happy Woodworking!


http://cgi.ebay.com/ebaymotors/Ford-Explorer-Passe

Re: OT I am Cheap but I need some info *LINK*

#12

Re: OT I am Cheap but I need some info

Pete LaBelle

>Working for an OEM supplier, mu guess is there is no wiring for your seats. Those motors draw a lot of current and may work thru relays under the dash. Leaving a 1 size fits all wiring harness in the car costs money when it is not used, especially for something with a substancial current draw, like a seat.

Good luck.....

Re: OT I am Cheap but I need some info *LINK*

#13

Re: OT I am Cheap but I need some info

Kevin Rabenaldt

>You have lived without them this long, why bother?

Kevin

Re: OT I am Cheap but I need some info *LINK*

#14

I did check

Dustmaker Mike

>those two links. They send you an E-mail with the priceing as far as I can tell. I was just wondering price and what was out there. I think I am on to a few of them.

Thanks

Re: OT I am Cheap but I need some info *LINK*

#15

So what did Mike find out

Dustmaker Mike

>well I have sent the MFG an E-mail to see how they would work out. They have not replied yet. But I think I may have found 3 in a Boneyard about 30 miles from here so I will be able to see how they go in and what else I may need to make them work. When I get back from this trip I will research this some more cause it is not as bad as I thought.

Re: OT I am Cheap but I need some info *LINK*

#16

I will have to answer this

Dustmaker Mike

>with the standard answer. Why Not?