Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Rare Exotic & Domestic Hardwoods, Milled In-House in Oregon. Browse Unique Stock.

wood choice for sign in Texas

Posts

wood choice for sign in Texas

#1

wood choice for sign in Texas

Carolyn

>Hi everyone, love this site....I really need some advice. I have been hired to carve a sign for a Hunting Ranch in Texas. I was hoping for any suggestions on which type of wood to use that would best suit that climate. I am from Pennsylvania and have used Sassafras for outside signs, it's pretty close in grain and color to oak and carves relatively easily..and it's supposed to be rot resistant. This sign will have a decent amount of detail. Any help is really appreciated!

Re: wood choice for sign in Texas

#2

There's only two choices to typify Texas

Forrest Addy

>There's only two choices to typify Texas, pecan and mesquite. Pecan comes in wide boards and weathers failry well. Mesquite comes in boards up to 6" wide while quite hard it can be carved. Its intricate grain and shadings have to be considered before a design theme can be imposed on it. If your client is picky, consult closely before committing an edge to the material.

If the place is to really conform to Hollywood stereotypicalization the letters and design elements should be formed of suitably twisted cypress or cedar limbs.

Re: wood choice for sign in Texas

#3

What about cypress?

Johanna

>Depending upon where this place is, it might be pretty wet. Texas has a wide variety of climates.

Re: wood choice for sign in Texas

#4

Texas Has a Lot of Oak, Too !

Robert Hutchins

>

Re: wood choice for sign in Texas

#5

Dale Lenz

Re: wood choice for sign in Texas

Dale Lenz

>I'd bet an easy hundred dollars; sassafras grows in east Tx. Keep it simple, use saffafras if that is what works for you.

Re: wood choice for sign in Texas

#6

Re: wood choice for sign in Texas

Carolyn

>thanks everyone, oak intimidates me because of the detail I need to get into it and as we all know, time is money!! I looked into my local lumber yard for pecan or mesquite, it's expensive! maybe I'll just do the sassafras, stay with what works for me.

Re: wood choice for sign in Texas

#7

Just Where, in Texas, Is this Ranch?

Robert Hutchins

>It's 905 miles from Orange to El Paso and about as far from Amarillo to Houston. El Paso is closer to Los Angeles than it is to Orange, TX. And I believe Amarillo is closer to Chicago than to El Paso. If you check a USDA horticultural zone map then check a rainfall map, you'll find that the diversity in the Lone Star State can be quite extreme. Are you sure sassafras will last through West Texas sun? One thing sure, ain't no part of Texas I've been in like any part of Pennsylvania I've been in; so I wouldn't clear leather too fast.

Re: wood choice for sign in Texas

#8

Re: Just Where, in Texas, Is this Ranch?

Carolyn

>this ranch is located in Trent, Texas, not far from Abilene.....

should I be concerned about the sassafras in the sun??

Re: wood choice for sign in Texas

#9

Re: Just Where, in Texas, Is this Ranch?

Robert Hutchins

>Howdy Carolyn !

Abilene is on the Llano Estacado - the high plains of northwest Texas. From the top of a 60 foot water tank you can see all the way to New Mexico (well, almost). It's flatter, drier, and windier in that part of Texas. If the sign is to be exposed to the elements, especially direct sunlight and its UV component, I'd be concerned about how long it will last made of wood - any wood. Having said that, please understand that I am no expert on the physical or other properties of wood; but I have lived in Texas for 14 years and seen what the low humidity, wind and sunlight can do.

If I had to make the decision, I'd look for an expert like Dr. Bruce Hoadley and ask the question about sassafras. I'd also look for an online forum for carvers - like the one in the panel at the left - and ask there.

HTH