Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Good Hope Hardwoods - Walnut Slabs & Specialty Hardwood Lumber

how would you deal with this?

Posts

how would you deal with this?

#1

how would you deal with this?

Lee Beeden....A Brit in Canada

>I'm Finishing up a kitchen. While applying oil It occured to me that I had forgotten to deal with the drawer fronts. Now the problem is;

drawer fronts range in width from 6.5 to 10.5 inches and I screwed them in and did'nt allow for expansion. I also had another problem I couldnt find 1 1/8" screws(1/2" baltic birch boxes and 3/4" overlay solid birch fronts) so I used 1 1/4" pocket hole screws driven at an angle. I'm not happy with that either. Boxes are finished,I need a quick fix, what would you do?

Thanks

Lee

Re: how would you deal with this?

#2

Re: how would you deal with this?

Mark Rakestraw

>Hello Lee,

I usually use 1" pocket screws and countersink the head just slightly. That gives the 1" screw plenty of bite into the drawerfront and also looks nicer on the inside.

Mark

Re: how would you deal with this?

#3

Re: how would you deal with this? *LINK*

James Dillon in MD

>Lee,

Another option might be the super round washer head screw from Mcfeelys used to fasten drawer fronts to the drawer box. By making the screw hole a tad bigger than necessary, will allow for wood movement and the big head on the screw covers the bigger hole. I've used them and they work as advertised. Just a thought.

Jim


Mcfeelys super round head screw

Re: how would you deal with this?

#4

more problems than screws....

bill tindal, E.TN

>1. I custom size screws routinely by grinding the points on a grinder. But counter sunk 1" would be a better solution.

2. I doubt that the screws in plywood will constrain enough to fracture the fronts.

3. Oil is a very poor kitchen cabinet finish, presuming the kitchen will be used for cooking. It is not sufficiently protective in a kitchen environment.