Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Super Resolution Thermal Imaging Camera

Making a Spoke Shave, Lee Valley Class

Posts

Making a Spoke Shave, Lee Valley Class

#1

Making a Spoke Shave, Lee Valley Class

Jim Shaver Oakville, Ont.

>Hi,

A week ago I had the pleasure of teaching a class at the Burlington Lee Valley store, making a Low Angle Spoke Shave.

The shave was made using the Veritas kit. It is similar to but different from the popular Hock kit in a few ways. It does not rely on set screws in the base to control blade height, also, the thread posts are removable, allowing easy sharpening on a water stone.

Depth adjustment with the Veritas shave is controlled on top of the shave, a lock and set screw control the depth with a simple set and lock of the screws. The depth screw is controlled with a brass insert that is tapped into the wood with a wood tap that is included with each kit.

I had a class of 6 students, all with a wide variety of woodworking skills and interests. The pleasure of this kit is that you are making a very functional hand tool that also can be customized by shaping and sizing for specific or general uses.

Photobucket - Video and Image Hosting

Photobucket - Video and Image Hosting

Almost all of the work was completed using hand tools, with the exception of the drill press and a small router to clean out the throat plate location.

Photobucket - Video and Image Hosting

The class also had the chance to go one step further, we customized the shave with a rosewood throat plat rather than use the brass alloy plate provided.

Photobucket - Video and Image Hosting

Photobucket - Video and Image Hosting

And the results, I supplied the class with figured cherry and flame birch cut off�s from my shop..

Photobucket - Video and Image Hosting

The proof is in the shavings�.

Photobucket - Video and Image Hosting

Photobucket - Video and Image Hosting

The class used a shellac finish and wax top coat.

Photobucket - Video and Image Hosting

I have to thank the students for being so helpful and kind, Walter did not cut his hand in the class, he said it was an encounter with a jointer. I also had a father and son team, it was the son�s Christmas gift to his dad, they were a lot of fun!

Photobucket - Video and Image Hosting

Photobucket - Video and Image Hosting

I have made about 4 of these now and I know I will be making more, and every one in the class said the same thing as well. A great kit, class and day, there is something special about making a custom hand tool that you know you will use.

I would like to thank the kind and wonderful staff at the Burlington Lee Valley store, in particular Syl.

Take care,

Jim

Re: Making a Spoke Shave, Lee Valley Class

#2

Neat!

Tony - Memphis

>I built one of those kits. Nice kit. Nice shave. I enjoyed it. Could have used your class though. Mine was a Christmas present. I used a really nice piece of scrap curly maple. I like the rosewood sole option. Nice detail.

Tony

Re: Making a Spoke Shave, Lee Valley Class

#3

Re: Making a Spoke Shave, Lee Valley Class

Paul D. May

>Hey, I missed this yesterday...so now your a teacher eh?

What next Jim...your own Woodcraft store?

Paul