Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Precision you can feel — woodworking perfected with Lee Valley

LV dust collection bag question

Posts

LV dust collection bag question

#1

LV dust collection bag question

Ken Platt (Granby, CT)

>Folks -

I was thinking of upgrading my DC with one of the LV bags. The bags I have now are supposedly 5 micron, but they were a cheapo brand (Reliant) and I really wonder about their quality. I get a small cloud of dust off them when they inflate when the machine goes on - is this common?

Also, the current bags are only about 34" high, so the LV bags (48" high) should have a fair bit larger surface area, hopefully allowing better air flow.

Has anybody done this sort of an upgrade of DC bags, and did you find it made a difference in quality of collection , air flow, etc? Or is the $50 not worth it for a small-time hobbyist user?

Thanks -

Ken

Re: LV dust collection bag question

#2

Re: LV dust collection bag question

Glenn Madsen near San Francisco

>I put 72" tall, heavy felt bags on my Delta. Probably 1 micron, I don't exactly remember. But they work well. I get a lot more dust in the shop from the ROS and routers than I do from the DC bag leakage. The factory bag is still in the box on the shelf.

Rockler overordered these, and was clearing them at maybe $30. Not many people have place to run bags this high in this area.

Re: LV dust collection bag question

#3

Felt Bags

Marvin Horn

>Don't have experience with the LV bags, but when I changed from the stock Grizzly polyester to oversize Oneida felt bags the pressure drop across the bag was reduced from from 2-3" to less than 0.5" which relates to a huge increase in air flow. Filtering was vastly improved (no more dust clouds on start-up) and a seldom mentioned benefit was a huge reduction in noise. One of the best simple improvements I've ever made.

Re: LV dust collection bag question

#4

Re: LV dust collection bag question

Ed Mulligan, Cape Cod

>Ken

I upgraded a 1 hp Reliant dust collector with 2 bags from Oneida. The improvement in airflow was dramatic and dust 'throughput' was virtually nil.

Ede

Re: LV dust collection bag question

#5

Re: LV dust collection bag question *LINK*

Bob Dodge

>Ken,

Probably the best deal out there at the moment on high-quality filter-bags, are the filters from Process Systems. They offer 16 oz needle-felt, with triple-stitched seams, and they'll custom-size them for your dc and application. Now I may be wrong on current pricing, but I believe they'll sell you a pair of filters for roughly $69. I know guys who have ordered custom-oversized filters, and paid under $100. for the pair. Absolute steal, given the quality of the product.

Bob


Process Systems

Re: LV dust collection bag question

#6

Another option *LINK*

Bob Fawcett

>cartridge filter from the link below.

I converted my HF and am pleased with the results. No more dust blowing around the shop and much improved airflow.


Wynn

Re: LV dust collection bag question

#7

OK, I'm sold - but 1 bag or two?

Ken Platt (Granby, CT)

>Ok, so it sounds like a worthwhile upgrade. I appreciate the pointer to Oneida, as their filter bags will physically fit my shop better - I don't have a lot of headroom. The joists are just 44 inches over the rim of the dust collector body, and the LV bags are 48". I figured I'd pull 4 inches down over the midsection of the DC (even though that wastes some of the capacity). The Oneida is only 36" high.

But now I'm wondering if I need a bottom bag also. I had just been going to replace the top. And, if I replace the bottom with the Oneida bag which is 30" in diameter, what happens when the bag tries to inflate around those 2 metal rods which hold up the midsection of the DC? There's only 20" between them.

Opinions, thoughts?

Ken