Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

This is the most versatile work station you will ever use

Putting together a group lumber buy for PNW *LINK*

Posts

Putting together a group lumber buy for PNW *LINK*

#1

Putting together a group lumber buy for PNW *LINK*

arw01

>I have 300 bd ft of mostly cherry in West Virgina to be shipping to Spokane, WA.

A co-worker of mine is going to add another 200 bdft this week.

If some other PNW woodworkers would like to piggyback on and split the shipping from West Viginia out to here, the more the merrier.

Wood pricing and species can be found at Tom Stauffer's site:

www.hazwoodworks.com

Here is what I have in West Virginia and what I paid in September:

* 025 bd 5/4 Cherry #2 0.85

* 120 bd 5/4 Cherry #1 1.75

* 025 bd 5/4 Cherry #2 0.85

* 056 4/4 Hd Maple #1 1.50

* 052 8/4 Cherry #1 3.50

* 020 8/4 Spalted Maple 3.00

* 020 4/4 Sassafras FAS 2.00

(I HAD a free trip home for the wood, but a certian hurricane and FEMA messed that up) so my lumber has been sitting back there. It does not appear that I will get a free trip, hence the desire to split the freight up a bit.

In all likely hood I will also add to my order, as my shop is nearing completion and I would have room to store it now. (another reason I let it sit)

Tom has a day job, his email address and phone are on his website.

I'm shooting for about the middle of March to get the wood shipped. I have some ability with vendors and co-workers to move the wood around the PNW a bit in smaller bundles.

Places I can get wood pretty easily to:

Spokane (delivery location)

Missoula (every couple of months)

Yakima (couple times a month)

Moses Lake (couple times a month)

Wenatchee (once a month)

Boise (couple of months)

Alan


http://www.hazwoodworks.com

Re: Putting together a group lumber buy for PNW *LINK*

#2

a caution to inexperienced lumber buyers

bill tindal, E.TN

>This warning will not make me popular with the poster in the short term but it could save him endless grief later...

I am assuming that freight on a small quantity of lumber is going to be substantial. Personally, I would not recommend to most woodworkers that they spend such freight costs on low grade lumber. Potential customers should know what 2 common lumber looks like before ordering. Including freight, one could easily have more money in usable cuttings than what a higher grade would cost locally.

We were never successful selling even 1 common lumber to retail customers. The typical amateur woodworker doesn't have experience getting good yield from such lumber. Bottom line, if you are not experienced in lumber grades you may expect more than what you will be getting from 1 or 2 common lumber. Actually, if you aren't accustomed to buying lumber by grade, as opposed to picking through a pile, you will be expecting more than what you will be getting.

Don't misunderstand this caution. The price is good, and I have no reason to think the preparation and grading is deficient. The problem is that inexperienced lumber buyers have unrealistic expectation as to what graded lumber will look like, especially cherry and walnut. This last statement is based on 30+ years of selling lumber to such folks.

Re: Putting together a group lumber buy for PNW *LINK*

#3

Re: a caution to inexperienced lumber buyers

Ted Wong

>I concur with your experience. I use a lot of #1 and #2 and even lower grades because I never cut up logs for grade and almost always cut logs in Boule form for the matching planks. Experienced furnituremakers like lumber like this for the grain matching and consistency and can get the yields they need. As you mentioned I've tried to sell parts of logs to recoup my sawyer expenses but inexperience often leads potential buyers to run the other way when they see a few knots or other "defects" fearing they can't work around them. I'd say in almost 85% of the cases most of what I use are 4' and shorter pieces that can usually be had out of a #1 board.

Re: Putting together a group lumber buy for PNW *LINK*

#4

Re: a caution to inexperienced lumber buyers *LINK*

arw01

>It is a good "BTW" message to those who don't know their way around any place than a woodcraft lumber pile at 2 - 3 times the price of FAS from back east.

Locally, our Cherry selection that is marked FAS is closer to the #1 I bought from back east a couple of years ago. Local MASSIVE cabinet manufacturer charges $6.90 a bf for #1 cherry that THEY have rejected.

The splits and cracks, knots, defects etc have made for good secondary wood at prices FAR below popular out here in my area of the country.

Cherry Select is over $8.00 a bdft at a local plywood retailer. I can buy it for $4.00 back east, pay the freight, have better wood, and be in it less cost!

in case you did not look, there are good pictures on the sawyers site of the grading he uses.

Alan


Lumber Grades at www.,hazwoodworks.com

Re: Putting together a group lumber buy for PNW *LINK*

#5

utility of various grades

bill tindal, E.TN

>Indeed I find good value in 1 common. Particularly in walnut and cherry it can have less sap and in poplar and oak the cuttings are usefully large. I use a lot of 2 common poplar as secondary wood. It is uncommon to need more than about a 2' length in a secondary wood-drawers and the like. Given a large stash I can usually find exactly the length I need between a pair of defects, so waste in minimal. However, if I expect to be hand planing surfaces, eg drawer fitting, the grain reversals more prevalent in 2 common cuttings are a big problem.

Cherry and walnut quality is so poor these days that FAS1F or Sel &btr (the best grades you will find available in these species) often has not much more yield than 1 common. I don't find much use for the 2 common grades in these 2 species because the allowed cuttings are so small. I usually generate plenty of this sized stuff from cutting higher grade lumber. Which may be why the prices of the 2 common grades in these species seems very low.

But working this lower grade lumber requires a good eye for efficient cutting, reasonable expectations, and a big stash to choose cuttings from will increase yield.