Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Rare Exotic & Domestic Hardwoods, Milled In-House in Oregon. Browse Unique Stock.

Norms pinned dadoes

Posts

Norms pinned dadoes

#1

Norms pinned dadoes

Scott in Eastern Iowa

>Evenin Everybody...

I'm doing an open bookcase like carcass for my little ones toys and have an assembly question. This will be solid red oak assembly.

When Norm is doing casework and he makes a shelf into a dado...he usually shoots some pins in the dado'd panel sides to hold it in place. Now is he shooting both sides of that panel or one side only?

I'm pretty sure its both sides, but I'm second guessing myself here as I thought about it awhile. Whats the frequency of said pins per side?

Also ...he glues them in as well as pinning right?

Scott

Re: Norms pinned dadoes

#2

As I recalll it…

Rod Peterson -- Ormond Beach

>> When Norm is doing casework and he makes a shelf into a dado...he usually shoots some pins in the dado'd panel sides to hold it in place. Now is he shooting both sides of that panel or one side only?

I'm pretty sure its both sides, but I'm second guessing myself here as I thought about it awhile.

I think this might have varied over the years. I believe he might have done just one side when he first started doing it, but in the last few years he's done both.

> Whats the frequency of said pins per side?

Just a guess, I'd say every 12" or so…

> Also ...he glues them in as well as pinning right?

Yep.

One thing I've wondered—in recent years he's been using a lot of that prefinished ply. I wonder how well glue acts on those surfaces? The end of the shelf to the bottom of the dado is okay, but the edges of the ply that fit into the dado would be a question mark in my mind, and that's often ≈½ of the glue area.

Rod

Re: Norms pinned dadoes

#3

Re: Norms pinned dadoes

Rusty Miller

>Yes, Norm does shoot brads into the panels that he puts in dados in casework. I think he only puts them in from the bottom.

Chris Schwarz did an article for Woodworking magazine a few issues ago on cut nails. He uses these in the same way that Norm uses a brad nailer. He also goes into detail on this technequic (sp) on his video "Forgotten Hand Tools". Very interesting stuff. Nails were used in old casework and furniture a lot more than we realize.

Hope this helps.

Rusty-Tye,TX

Re: Norms pinned dadoes

#4

Re: As I recalll it…

Glenn Madsen near San Francisco

>"One thing I've wondered—in recent years he's been using a lot of that prefinished ply. I wonder how well glue acts on those surfaces? The end of the shelf to the bottom of the dado is okay, but the edges of the ply that fit into the dado would be a question mark in my mind, and that's often ≈� of the glue area."

The folks at the professional plywood purveyor (like the alliteration?) sold me a small bottle of Roo Glue to try with the prefinished ply. Hey, it was on the label, and only $8! Will it work? I won't know for several weeks, at least. But I do go through 20 sheets of prefinished a year, maybe. So it was woth the $8.