Est. 1998 — 27 years of woodworking knowledge
Rockwell Cabinet Saw Question
Dave Rawson
>I have just purchased an old Rockwell 10 inch Cabinet Saw
Model# 34-450 Ser# G12613.
Can anyone tell me where I can find out the date of manufacture and where to find parts for a rebuild of this Saw.
Thanks in advance for your help.
Dave
Try this link. *LINK*
Robert Hutchins
>
Old Woodworking Machines
Re: Rockwell Cabinet Saw Question
Barry Irby
>I have a thirty five (plus) year old Delta/Rockwell contractors saw. Bought parts for it from Delta through their website through the "service net" thing. Whatever it was, its on the Delta tool site. Also found a local repair shop that gets the parts without any trouble.
Re: Rockwell Cabinet Saw Question
Michael Wilkins
>Dave, I have a Rockwell/Delta Unisaw and I think that is the same model number as mine. Go to the OWWM website where you will find a dating chart for Delta machinery. Mine was manufactured in May of 1964, has the 1.5 horse 240volt single phase motor. I upgraded the fence with the Unifence which will bolt up with no modifications at all. Delta still has parts for these old warriors. I got a replacement front door w/handle from them.
I also got them to send me a diagram w/parts numbers @no charge.
Delta can be reached at 1-800-223-7278
Re: Rockwell Cabinet Saw Question
Dave Rawson
>Thanks to those who responded I have narrowed the saw down to the mid 50's to early 60's.
Thanks again for your help
Dave