Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Good Hope Hardwoods - Walnut Slabs & Specialty Hardwood Lumber

router bit selection

Posts

router bit selection

#1

router bit selection

Tony O

>Is an up cut or down cut spiral bit preferred for plunge routing

mortises in hard wood?

Re: router bit selection

#2

Upcut

Hoa Dinh in Alameda

>It will pull the chips out.

A downcut will push the chips down. They have nowhere to go and will likely burn.

-- Hoa