cut capacity of 10" unisaw

1/9/07, 10:11 PM #1

cut capacity of 10" unisaw

MikeGivra

>Probably a dumb question, but with a 10" unisaw can you cut through 4x4's at a 45 degree angle?

1/9/07, 10:21 PM #2

Re: cut capacity of 10" unisaw

Keith Newton

>Unless things have changed, I believe it is 2 1/8" rip height at 45�.

1/9/07, 10:25 PM #3

Not even at 90....

Hoa Dinh in Alameda

>I believe the max height of a 10" blade on a Unisaw is 3 1/8".

-- Hoa

1/9/07, 10:48 PM #4

Not even with a 14" blade....

awh

>A 14" blade has a 4 1/2" depth-of-cut at a 90� and 3 1/8" at a 45� angle.

A 16" blade has a depth-of-cut of 5 1/2" at 90� and 4 1/8" at a 45� angle.

1/10/07, 1:15 AM #5

nope...gonna need a chop saw

Scott in Eastern Iowa

>

Posts