Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Compare cordless drills on the numbers that matter

We've Officially Moved.....

Posts

We've Officially Moved.....

#1

We've Officially Moved.....

Wally Dickerman in Arizona

Despite what it says above I'm no longer an Arizonian....I'm now an Oregonian Tues we flew from Tucson to Portland and are starting to settle in. Most of my shop however is still in Az including my big Oneway lathe... The moving will be done later this month. I do have a small Delta lathe here should the urge to turn something grab me.

One of my first moves will be to join one of the local turning clubs. I already know several turners here so that'll be easy.

The sun is out here in Oregon but it's not as warm as in Az. Oh well...I'm on the inside looking out.

Re: We've Officially Moved.....

#2

Dennis in Southern Oregon

Re: We've Officially Moved.....

Dennis in Southern Oregon

Welcome to Oregon, Wally. What brought you back north? I am at the opposite end of the state near Grants Pass. Our local club is Southern Oregon Woodturners, a chapter of the AAW.

Re: We've Officially Moved.....

#3

Re: We've Officially Moved.....

Rum

Welcome to the not so frozen north Wally. Its a nice time of year to be around this area.

I'm out in the Gorge a ways so almost but not quite neighbours. No clubs out here that I've found and the hour plus drive to Portland means I've never checked out any of those in person either.

While looking around I did find that there are a few though:

http://www.cascadewoodturners.com/

https://nwwt.wildapricot.org/

http://woodturningguild.com/

And just a bit further south:

http://www.willamettevalleywoodturners.com/

Re: We've Officially Moved.....

#4

Re: We've Officially Moved.....

Wally Dickerman in Arizona

Thanks Rum.....It'll probably be the Cascade club. I've been to a few of their meetings in the past.

Re: We've Officially Moved.....

#5

Re: We've Officially Moved.....

Wally Dickerman in Arizona

Dennis, we're back in the NW because after 18 years in Az. my wife and I have decided that we shouldn't live alone anymore We're both 93 and family is in Portland and Seattle. Last month I spent 8 days in the hospital and 8 more in rehab. That did it for us.

Re: We've Officially Moved.....

#6

Re: We've Officially Moved.....

John Lucas

I'm moving this weekend but only moving 30 miles south east. I'm glad your near your family. It's a good thing. We thought about moving closer to my family but decided to say reasonably close to Lucy's

Re: We've Officially Moved.....

#7

Re: We've Officially Moved.....

Phillip Medghalchi

Wally, glad you finally got settled in. Check out the Cascade turners in central Portland. I have been to their meetings three times and Dale Larsen (president of AAW) is one of their important member and some other older members who yo u may recognize. At the last meetings in 2013 they said they have more than 85 members. they meet in the shop of a High School on that 138 th street. There is another one on the East of Portland, I try to get the address for you and email you that info. I can not remember their name, but have it somewhere. Then on the other side of the river in Portland WA, there is NW WA woodturners. I get you the name of the president also, have his phone number if you want to contact them.

I am coming up to Vancouver, WA in the first part of the April, Hope I get to meet you if you are not busy.

Re: We've Officially Moved.....

#8

Come down to Albany this weekend...

Ralph Lindberg

.. and see lots (and lots) of regional turners at the Oregon Symposium

Re: We've Officially Moved.....

#9

Re: We've Officially Moved.....

Dominic Greco in Bucks County PA

Hi Wally!!! Long time so see!!!

Seeing your name pop up here was like a blast from the past!

Good luck on your move.

Re: We've Officially Moved.....

#10

Re: We've Officially Moved.....

Wally Dickerman in Arizona

Dom. where have you been? I guessed you had quit turning

Re: We've Officially Moved.....

#11

Re: We've Officially Moved.....

Dominic Greco in Bucks County PA

Not quite given up on it. I still turn from time to time. Just not as much as I used to.

I actually started using hand tools more and more. Even started a side business making them (www.tgiag.com)

Re: We've Officially Moved.....

#12

Re: We've Officially Moved.....

Mike Brazeau

Great to see that you are still out there Dom. When I do beads on a bowl base, I always remember your emphasis on that aspect of turning a bowl. Turn it over and have a surprise.

Re: We've Officially Moved.....

#13

Re: We've Officially Moved.....

Dominic Greco in Bucks County PA

Hi Mike,

Cool!

But truthfully it was Wally along with others here that encouraged me to add features like beads and texturing to the underside of the bowl.

Re: We've Officially Moved.....

#14

Brad Vietje

Re: We've Officially Moved.....

Brad Vietje

Hey Dominic,

Glad to see your name here! Haven't seen you post anything in a number of years. Glad to know you are still well!

Safe spinning,

Brad Vietje

Newbury (formerly Thetford) VT