Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Personalized Wooden Watches, Engraved Free

Insert tooling doesn't have to be carbide *LINK*

Posts

Insert tooling doesn't have to be carbide *LINK*

#1

Leo Cuellar

Insert tooling doesn't have to be carbide *LINK*

Leo Cuellar

After that thread on replaceable carbide insert tooling, I thought this gentleman's approach might be of interest to some of you. Might be good with Reed's tantung steel as the cutter?


https://www.youtube.com/watch?v=Jdhnm6biC1o&feature=youtu.be

Re: Insert tooling doesn't have to be carbide *LINK*

#2

Re: Insert tooling doesn't have to be carbide

John Lucas

good video although I wouldn't make the cutter out of high carbon steel. Just won't hold an edge very long although it's not bad. I make Christmas ornament hollowing tools out of Drill rod which is high carbon water hardening steel. they do alright but do need frequent sharpening.

I may have to look into getting some Tantung. Tantung is what I get when I bicycle up a long hill on a sunny day. :)

Re: Insert tooling doesn't have to be carbide *LINK*

#3

Re: Insert tooling doesn't have to be carbide

robo hippy

I think Packard had a hollowing tool that had an articulated head with a concave HSS cutter on the end. It came with a mandrill that you could screw the cutter onto and spin it so you could easily hone the cutting edge. Tantung is very hard and a cast metal. Mostly it is used in metal tooling. AG Wesson is the place down in Florida who makes it, and they don't usually have wider pieces in stock. I prefer the 1 inch wide pieces. You silver solder it on to bar stock, using a thick solder tape what ever that is. Stellite is another material that can be used. It comes out of Canada, and you use the same method to put it onto bar stock. It is also what the cutting tips on the Woodcut coring tool are made out of. Both are easy to sharpen on standard grinders. Maybe we need to convince them to make cutting tips for the woodturning industry......

robo hippy

Re: Insert tooling doesn't have to be carbide *LINK*

#4

He's pretty frugal

Dick Coers

That metal lathe has a stack of coins or something under the cutter, with a bent bolt holding the bit in the holder. Gets the job done, but it sure isn't pretty. Considering what you can get round carbide cutters for, that was a lot of effort to get that cutter as well.

Re: Insert tooling doesn't have to be carbide *LINK*

#5

Leo Cuellar

Re: Insert tooling doesn't have to be carbide

Leo Cuellar

Thanks for all the additional info! I didn't know the Woodcut system used it. I know MSC also has Tantung available, but good to know where it comes from. Eventually, I'll get some to play with.

Re: Insert tooling doesn't have to be carbide *LINK*

#6

Leo Cuellar

Re: He's pretty frugal

Leo Cuellar

Its amazing what a little yankee ingenuity or southern engineering (depending on which side of the Mason-Dixon line you hail from) can get you, if you really want to do something :D

Re: Insert tooling doesn't have to be carbide *LINK*

#7

Leo Cuellar

Re: Insert tooling doesn't have to be carbide

Leo Cuellar

I thought it was interesting as well, just goes to show everybody has their own spin on things.

Glad to hear everything is coming together for you. I hope you have great weather for the move.

Re: Insert tooling doesn't have to be carbide *LINK*

#8

Re: Insert tooling doesn't have to be carbide

robo hippy

Leo, these are the people that make the tantung, centered in Florida some where:

http://vrwesson.com/distributors.php?country=usa&state=oregon

It says Oregon, but you can find the home office some where here.

robo hippy

Re: Insert tooling doesn't have to be carbide *LINK*

#9

speaking of which side of the Mason Dixon

Dick Coers

and ingenuity..... I watched a history detective show on PBS yesterday about the sinking of the SS Sultana. They speculated for a while that coal torpedoes might have been used. Rebel Secret Service hollowed out lumps of coal, filled with gun powder, capped the hole and used coal tar and dust to cover that, then slipped them into the coal supply for Yankee Steam Ships. I think they said a total of 50 steam ships were destroyed during the Civil War. They deduced that the SS Sultana was sunk by greed from a Yankee Quarter Master that overloaded the ship by nearly 10 times, to get a kickback from the shipping company. The ship listed to the side, exposing the boilers, and blew when the ship returned to vertical. Fantastic show!