Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Premium Domestic, Figured & Live Edge Hardwoods in Stock. Best Prices for Serious Woodworkers.

Harbor Freight Mini metal lathe?

Posts

Harbor Freight Mini metal lathe?

#1

Harbor Freight Mini metal lathe?

darrin hill

For some odd reason my nephew has a HF mini metal lathe he's offering to me for $300…

was wanting to try a metal lathe some day, but are HF metal lathes on the same level as their wood lathes?

today was my birthday… i spent about 15 minutes seeing my kids then i was at work from 10am till about 10pm.. it's wedding season...

Re: Harbor Freight Mini metal lathe?

#2

Re: Harbor Freight Mini metal lathe?

Josh Bowman

I bought one and a friend of mine has one. They or good lathes and have a strong "cult" following as do the little mills. That is good since any mods or repairs are usually well supported. Little Machine shop carries almost all parts for the things. Having said that I sold mine, since it always seemed too small. The controls for the cross slide are child size to me. I bought a small used South Bend 9" and couldn't be happier. As to the price, it boils down to tooling. Chucks, cutter holders and other stuff can cost as more than the lathe. Again that was the attraction I had for the South Bend. It had nearly everything when I found it on Craigs List. Back to the mini lathe, I really could do much with it, since it's length and throw were always too small for my purpose. I'm still a novice at the metal turning, but am quickly paying for the investment in the ability to make/adapt stuff to my wood turning equipment. Handles, adapters and the like are usually easy.

Re: Harbor Freight Mini metal lathe?

#3

Re: Harbor Freight Mini metal lathe?

John Lucas

I had one. It was underpowered and as Josh said I almost always wanted a bigger one. However I did have fun with it and made a lot of smaller stuff. You do have to spend a lot of money on tooling and accessories. One of the best accessories is the milling table that fits on the tool rest and lets you do some small milling.

I suppose the machine would be fine if you want to do a lot of model making. I was always needing to make parts or adaptors for my wood lathes and tools and it's just to small for that.

I opted for a used Smithy that I got for $1000 and now several years later have more than $1000 in tooling and the list is growing.

Re: Harbor Freight Mini metal lathe?

#4

Harry Robinette

Re: Harbor Freight Mini metal lathe?

Harry Robinette

I have one and use it allot. Everyone is correct you will wont a larger lathe,I bought a 9x20 Jet but I will always keep my little HF cause it's so handy to have.

Also have Grizzly 8986 mini mill, I buy everything I need for them from Little Machine Shop.com very nice people to deal with.