Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Abingdon, VA – Tree Cutting & Portable Sawmill

Question for New Zealand Turners

Posts

Question for New Zealand Turners

#1

Question for New Zealand Turners

Bill Howatt

I made a bowl from local (Canadian) cherry for my nephew who now lives in NZ. He is presently here for Christmas and plans on taking the bowl back in his carry-on luggage. Bowl is well-dried, less than 8" dia, has both heartwood and sapwood, no bark, finished with polymerized tung-oil and wax.

I read this on the NZ Biosecurity site:

If you want to be sure of avoiding difficulties on arriving in NZ, make sure that all wood products you bring in are either free of pests, bark and soil (dirt), or have been certified treated by one of the methods described in the import health standard.



IMO, my bowl obviously meets these requirements. I assume a lack of worm-holes and tracks would imply there are no pests.

My question is: how much difficulty (time, hassle) is he likely to encounter on arrival at a NZ airport with this bowl?

I realize that NZ turner's are more likely to be exporting than importing but hopefully you, or somebody else, will have some insight.

Thanks,

Bill

Re: Question for New Zealand Turners

#2

Re: Question for New Zealand Turners

Sergio

There are virus diseases which are difficult or even impossible to detect from a piece of wood. Only a few study are done on virus diseases on trees and almost all on fruit trees, for obvious economical reason.

Re: Question for New Zealand Turners

#3

Re: Question for New Zealand Turners

ralph thomas

bill currently in nz I brought 3 small hollow forms for my wife,s relatives finished with laquer I declared them on the customs form had no problem with customs they did ask a few questions about bark and worm holes . hope this helps

Re: Question for New Zealand Turners

#4

Re: Question for New Zealand Turners

Bill Howatt

Yes, that's what I was wondering about, thank you very much.

Bill

Re: Question for New Zealand Turners

#5

Re: Question for New Zealand Turners

Geoff Whaling

I took both finished pieces and blanks to NZ from Australia (and back) for the Auckland Symposium last year and had very little trouble with NZ or Aust customs & quarrantine. Declared everything.

I checked requirements both ways before I left and had some info on the Oz & NZ timbers packed with me. Into NZ at near 1am in the morning the quarrantine people were more interested in the finished laminated pieces out of curiosity than they were in the raw blanks - because they were prepared well. Back into Aust was a little stricter mainly because of potential concerns about CITES listed timbers with the ancient kauri blanks. All good though.

Declare it all - not worth the quarrantine or financial risk. We have had issues in Queensland with asian honey bees, giant african snails, fire ants etc.

Re: Question for New Zealand Turners

#6

Thanks for the info, Geoff