Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Find a woodworking club near you

A potentially interesting surface enhancer *LINK*

Posts

A potentially interesting surface enhancer *LINK*

#1

A potentially interesting surface enhancer *LINK*

charlie belden

Central Texas has suffered through a heat wave and accompanying drought this summer. When 99 degrees is considered cool you know it's been hot. And cattle and crops don't do well without water. I figured if Raiin Dances didn't help then perhaps a Rain Wand might work.

So when I went looking for something I could use to put falling rain drops on this thing I found something others here might find useful in a future piece - GOLDEN's Clear Tar Gel. Unlike other of GOLDEN's clear mediums this one's thin enough flow off a small brush but thick enough to hold its shape. Milky white when wet so you can see where it's been applied, it dries very clear.


Here's the raindrops effect done with Clear Tar Gel.


If you're looking for a surface enhancement and dropplets are what you're after - this just might be what you've been looking for. Imagine a single tear running down the side of a piece, originating from a crack or void in the wood. Or a bowl with beads of water forming on it. I think this stuff can be colored as well. A bead of wine on the rim of a goblet. Has some interesting possibilities.


more about this Rain Wand

Re: A potentially interesting surface enhancer *LINK*

#2

Re: A potentially interesting surface enhancer

Randy Gleckler

That is a very interesting material with a lot of potential. I don't have any use currently but may keep that in mind. Thanks

Re: A potentially interesting surface enhancer *LINK*

#3

Re: A potentially interesting surface enhancer

Keith Newton----Little Rock, Arkansas

Thanks Charlie, I've been getting some good macro photos of dew covered dragonflies lately. I have been wanting to work some of the details into future projects, but hadn't even though of trying to use those jewel like droplets. But then, that might be too much like gilding the lilly.

What is the hardness of the final drops?

Re: A potentially interesting surface enhancer *LINK*

#4

Leo Cuellar

Re: A potentially interesting surface enhancer

Leo Cuellar

Thanks for sharing that, Charlie. That is a really great looking wand as well. Love the paint & special effects!

Re: A potentially interesting surface enhancer *LINK*

#5

Re: A potentially interesting surface enhancer

charlie belden

Keith:

When dry this stuff's hardness is somewhere between cooled hot melt glue and silicon caulking - closer to silicon caulking - at least after a few days. How hard it'll be in a month I don't know. I suspect it will remain flexible over time - handy if you plan on applying it to wood that moves a lot - like madrone

I probably ought to do some test samples - a 4x4 grid of dots - rows number of applications - columns days since applying

If you're after a glistening effect that's subtle and only visible when the light strikes it a certain way - the little glass beads they put in street lane lines may work better. Because they're glass spheres, light coming into them comes out at the same direction as it entered. So if the light is behind you and the piece directly in front of you - the little glass beads glow. It's a very transient effect and if the observer is moving, almost imperceptible. But the viewer's brain will register the effect even though the observer will pick it up but not get why.

I did a sumie type air brush painting of a cherry branch and twigs with the sun behind them. Used a hypodermic needle and syring to apply a thin coat of rubber cement to the underside of the branch and twigs then dusted the still damp rubber cement with striping beads. The piece was hung where afternoon sunlight from a nearby window would strike it. The glass beads would glisten - just like dew on the underside of a twig. It was a subtle thing, but quite interesting.