Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Exotic Hardwood, Personally Sourced Worldwide. Inspected at Origin. Shop Rare Stock.

Cutting up Irene trees?

Posts

Cutting up Irene trees?

#1

Cutting up Irene trees?

D Leydens

Here in central (northern area) North Carolina we had plenty of wind and rain, but nothing catastrophic. Even so, there are many trees down so finding some new turning wood is easy, just drive around and there will be folks who can't wait for you to cut up some of their fallen trees.

I helped a neighbor cut up a HUGE maple tree yesterday and I'm so sore I can hardly move. Have another neighbor who lost a very large Bradford Pear and that will be today's job. I can feel the pain already (lol).

How many other Wowie's have run across a good stash of wood?

Guess I better get sawing. Bradford Pear, here I come!

Don L.

Re: Cutting up Irene trees?

#2

Re: Cutting up Irene trees?

Bill Turpin in WNC mountains

The last time, about 6 years ago, that I cut up hurricane wood it split with audible cracks before it dropped from the saw to the ground. Eight inch diameter persimmon yielded only pen blanks. BooHoo!

Re: Cutting up Irene trees?

#3

Re: Cutting up Irene trees?

Barbara Gill

I will have access to Hackberry, maybe Sweet Gum and Walnut. The walnut is not much of a big deal as it is so common around here. At least I will be able to stock up on big roughed out bowls for future wedding presents.

Re: Cutting up Irene trees?

#4

Re: Cutting up Irene trees?

Woodie49

Boy, I wish we had that kine of would around here! Central cost of California

Re: Cutting up Irene trees?

#5

Rob Wallace

VERY GOOD POINT.....

Rob Wallace

you made Bill....

Trees that are toppled or snapped by excessive wind forces definitely have increased possibilities of having 'cryptic' internal defects, particularly wind shake (circumferential cracking parallel with the growth rings) and internal radial fractures (caused by relatively weak parenchymal rays acting as radial crack propagation points). This can be due to excessive wind loading and severe bending, sudden snapping when upper portions of trees break off after bending, or even heavy, water-laden trunks crashing onto the ground.

When the wood is wet, such defects can be hidden or at least not very apparent. Be sure that when turning such "wind-fall" wood, everyone should be aware of and vigilant for internal cracks and other defects. We don't want to create any "inside" disasters with heavy blanks coming apart due to hidden defects.

Turn Safely!!

Rob

Re: Cutting up Irene trees?

#6

Keith Tompkins

Re: Cutting up Irene trees?

Keith Tompkins

I got a big silver maple the wind blew over....

Re: Cutting up Irene trees?

#7

Re: Cutting up Irene trees?

D Leydens

Two of the folks that let me cut up their trees said that they were just going to drag the trees into the woods and leave them there. We can sure put this wood to better use than that. I got some Maple, Bradford Pear, Cherry and River Birch. What I couldn't use for the lathe will go to the firewood pile and it will all be used.

I'm also so sore I can barely blink! Perhaps I over did it just a tad?