Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Have a question? Ask Woody!

I'm having so-o-o much fun!

Posts

I'm having so-o-o much fun!

#1

Barb Siddiqui

I'm having so-o-o much fun!

Barb Siddiqui

8) 8) 8) 8) 8) 8) 8) 8) 8) 8) 8) 8) 8) 8) 8) 8) 8)


Re: I'm having so-o-o much fun!

#2

Shavings are not deep enough yet!

Carole Valentine

Either that or you clean up too often! :D :D

Re: I'm having so-o-o much fun!

#3

Steven Antonucci

You aren't turning enough if you aren't looking...

steven antonucci

down from the thick mat of shavings! ;)

You'll know you've "got it" when you keep a snow shovel in the shop...

Re: I'm having so-o-o much fun!

#4

Betty Scarpino

Re: Better than the previous lathe . . .

Betty Scarpino

I remember seeing your old lathe when I visited you a few years ago. Congratulations on the upgrade. Before I got my current lathe (a Oneway), I had my eyes on a Woodfast. I'll bet your turning enjoyment has tripled at least!

Re: I'm having so-o-o much fun!

#5

Steve Kubien

Well then, I guess I've got it *LINK*

Steve Kubien


See that little stick-like thing at the bottom of the picture? That's my snow shovel. Hmmm, perhaps I also need a better place to store my tailstock when it's not in use.

This picture came from a recent blog post of mine. Guess the theme!

So, Barb, get busy!


Papas got a brand new bag!

Re: I'm having so-o-o much fun!

#6

Re: I'm having so-o-o much fun!

Jeff Willaford

Good for you. You think you're having fun now? It will get even funner. Is that a word? When you have to shovel out the shavings so you don't have to bend down when you turn....THEN you're having fun.

PS: I clean my floor at least once a day. Small studio.

Re: I'm having so-o-o much fun!

#7

Barb Siddiqui

Whoa! I truly am a Novice!

Barb Siddiqui

Re: I'm having so-o-o much fun!

#8

Barb Siddiqui

Hmmmm..

Barb Siddiqui

you guys are right. I haven't bought a shovel yet!

Re: I'm having so-o-o much fun!

#9

Barb Siddiqui

Re: Shavings are not deep enough yet!

Barb Siddiqui

Awww... and I was so proud! Just had to take a picture.

Re: I'm having so-o-o much fun!

#10

Barb Siddiqui

Re: Better than the previous lathe . . .

Barb Siddiqui

Who was it who said, "Bigger IS better?" yes, yes. I'm so happy with this Woodfast I just clench up and grin every time I approach it. I have on the faceplate a 12" d. piece of English Walnut with beautiful grain, but it isn't a consistent 1" thick, so my experimenting with it yields no promises. If I can make a platter out of this, it is going to be a thin one for a first try. May blow it up, I don't know, or go through it. The screws holding the faceplate go pretty deep. Ah well, it's only an experiment.

Re: I'm having so-o-o much fun!

#11

Leo Cuellar

Re: Hmmmm..

Leo Cuellar

That is one sweet looking lathe, Barb! What are you going to do with all of those shavings? I can only compost so many at home, some I have to burn. Recently, I found out that some friends with a small farm can use as many as I can make :)

Re: I'm having so-o-o much fun!

#12

Barb Siddiqui

Re: Hmmmm..

Barb Siddiqui

So far, they've been yard mulch, but we're getting full up and I may soon have to go looking to the neighbors!

Re: I'm having so-o-o much fun!

#13

Barb Siddiqui

PS-Is English Wlnt as bad as Black Wlnt?

Barb Siddiqui

Re: I'm having so-o-o much fun!

#15

Re: I'm having so-o-o much fun!

Molly Winton

She looks just as happy as you! We SO did the right deal!

Re: I'm having so-o-o much fun!

#16

Barb Siddiqui

Thanks Leo.

Barb Siddiqui

Re: I'm having so-o-o much fun!

#17

Barb Siddiqui

Yay!

Barb Siddiqui

A story: yesterday I was happily turning away on the face of this piece, and began to hear a 'funny' noise. Sounded a little like belt slippage from the headstock. Stopped to open the top folding door..nothing wrong. Continue. Noise getting worse. Funny noise. Pulled on the workpiece but got no movement, though I knew it was wrong. Stopped. Opened everything up and examined the machine, thinking, "Don't tell Molly." Nothing was wrong. Finally thought to set the spindle lock, then rattle the workpiece, and lo and behold, my short screws were loosening. Simple fix, take them out of the faceplate and set in deeper ones. But gotta' say, my first thought was "don't tell Molly!"

Re: I'm having so-o-o much fun!

#18

Re: I'm having so-o-o much fun! and it shows..

Ruth Niles

Barb, isn't it a thrill the seeing the chips all over the place! At times I have so much fun, I forget to stop and what started out to be an 8" bowl might be a 3" rice bowl.....or just mulch for the garden. I love watching the ribbons fly.

Re: I'm having so-o-o much fun!

#19

Barb Siddiqui

Re: I'm having so-o-o much fun! and it shows..

Barb Siddiqui

Glad I'm not the only one getting 'carried away!' It is true, when the ribbons are floating off a piece with ease, I can just keep it going, watching in fascination, and forget I'm removing significant volumes of wood.

Re: I'm having so-o-o much fun!

#20

Outstanding Barb !

Don Orr

Re: I'm having so-o-o much fun!

#21

Steve Kubien

Re: I'm having so-o-o much fun! and it shows..

Steve Kubien

I was going at a piece of wet maple like that yesterday. This 13" rough-out salad bowl could easily have become a thimble. too much fun, too little wood.

Re: I'm having so-o-o much fun!

#22

Barb Siddiqui

Re: I'm having so-o-o much fun! and it shows..

Barb Siddiqui

:D And for years I wondered why round so quickly replaced flat woodworking!