Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Precision you can feel — woodworking perfected with Lee Valley

If Someone Took ALL Your Turning Tools Away - and

Posts

If Someone Took ALL Your Turning Tools Away - and

#1

If Someone Took ALL Your Turning Tools Away - and

charlie belden

- you could only get back those tools you could describe - from memory - how many do you think you'd get back?

I posted this question to the Hand Tools forum because "handtools" and their "accoutrements" seem to accumulate quicker than turning tools. Now that I think about it - that's may not true. One chuck, one allen wrench to tighten & loosen the jaws, another to loosen and tighten the screws that hold the jaws, two or three other sets of jaws (4/set), live center - with four or five "inserts", . . .

I COULD identify the first three gouges and chisels in my tool holder - and could lay my hands on the mini-skew, mini-roughing gouge and DIY parting tool. But if you pointed to the end of a gouge handle and my life depended on telling you what gouge or chisel was on the other end - I'd be dead for sure ; )

Let's limit this to JUST gouges and chisels. If someone removed them all from your shop and you could only get back those you could describe pretty accurately - "roughing gouge" - without specifiying size and maybe length would be too generic - what percentage of your "armory" would you probably get back?

Re: If Someone Took ALL Your Turning Tools Away - and

#2

Re: If Someone Took ALL Your Turning Tools Away -

clay foster

All four of them.

Re: If Someone Took ALL Your Turning Tools Away - and

#3

JL

Re: If Someone Took ALL Your Turning Tools Away -

JL

I am NOT by my lathe.

From memory:

3/4" oval skew chisel (Delta)

1 1/2" oval skew chisel (Sorby)

3/4" roughing gouge (Delta)

1 1/4" roughing gouge (Crown)

3/8" spindle gouge (Delta)

1/2" spindle gouge (Sorby)

1/4" Skewchi gouge (home made)

1/2" bowl gouge (Crown)

3/8" bowl gouge (Crown)

You said just the gouges and "chisels".

Re: If Someone Took ALL Your Turning Tools Away - and

#4

Dick Hines

Re: If Someone Took ALL Your Turning Tools Away -

Dick Hines

Only need four.

Parting tool

5/8" bowl gouge

3/8" bowl gouge

3/8" detail gouge.

Re: If Someone Took ALL Your Turning Tools Away - and

#5

Re: If Someone Took ALL Your Turning Tools Away -

John Lucas

I think I could reproduce almost all of them (and I have a bunch). Each tools was either selected for it's shape or I modified the shape for a certain function.

Re: If Someone Took ALL Your Turning Tools Away - and

#6

Re: If Someone Took ALL Your Turning Tools Away -

Russ Fairfield

I hate to tell you this, but there once was a time, and not that long ago, when there were no turning tools on the market. We made our own. Some of us remember those days and we could do that again.

Re: If Someone Took ALL Your Turning Tools Away - and

#7

Re: If Someone Took ALL Your Turning Tools Away -

Barry Irby

Not sure what your question really is. Could I reassemble and acceptable arsenal? Sure. But not with one trip to the store. It would take many trips and for several years I would be saying to myself, I used to have a ..... but it's gone, and now I need another. OTOH, I did not assemble my present collection in one trip tot eh store either and there are some parts of it I would to bother with, ever again.

Another aspect to this is if it were an insurance claim. This is a good reason to keep receipts, if your insurance covers your shop at all. (A good thing to check on) Also, this is a good thing to do with a digital camera or camcorder. Take pictures of everything. Open every drawer and take pictures. Then be sure they don't steal the memory card or that it does not burn up.

Re: If Someone Took ALL Your Turning Tools Away - and

#8

Was it difficult knapping the flint.   

John Lucas

Re: If Someone Took ALL Your Turning Tools Away - and

#9

I'd Find 'em and Kill 'em.....

Wally Dickerman in Arizona

Re: If Someone Took ALL Your Turning Tools Away - and

#10

Re: If Someone Took ALL Your Turning Tools Away -

Carole Valentine

At least everything I needed and then some. I even know what's in my "Useless and Almost Useless Tools" drawer.

Re: If Someone Took ALL Your Turning Tools Away - and

#11

Re: You must be joking Charlie!!!

JamieDonaldson

Re: If Someone Took ALL Your Turning Tools Away - and

#12

Re: If Someone Took ALL Your Turning Tools Away -

Bill Neddow

I could probably identify 25 or 30 of the 100-150 gouges I have collected from all around the world. I could get by with four -- but would be happier with six. And, to replace these "indispensable' tools, I would only have to make one phone call -- to Doug Thompson.

Re: If Someone Took ALL Your Turning Tools Away - and

#13

Re: If Someone Took ALL Your Turning Tools Away -

Barry L Elder

All of them. But then, I don't phisopholize the day away when I can be in my shop melting in the heat! Somehow that din't ocme out wirght! Mus be the lacker, or likker, or the heet! hee! hee! hee! ;)

Re: If Someone Took ALL Your Turning Tools Away - and

#14

Barb Siddiqui

Yay for Wally! right behind ya'

Barb Siddiqui

Re: If Someone Took ALL Your Turning Tools Away - and

#15

I'd make another batch... ;-)

Doug Thompson near Cleveland

Re: If Someone Took ALL Your Turning Tools Away - and

#16

Re: If Someone Took ALL Your Turning Tools Away -

bill crommett from Seneca

I an barely remember the alphabet and it only has 25 letters.

Re: If Someone Took ALL Your Turning Tools Away - and

#17

Re: If Someone Took ALL Your Turning Tools Away -

charlie belden

Barry:

I needed the laugh. Was taking ANOTHER break from working on The Three Sisters stamp controller software. Get two of the three sisters behavior routines working - add one of the third sister's behavior and - things go to hell in a hand basket. 2 & 3 work, 'til 1 is added. 1 & 3 work, 'til 2 is added . . . So now I've added a second stamp controller which SHOULD solve THAT problem.

Between code writing and debugging, as a break, I put another coat of Satin White on the display box The Three Sisters will be on - space below for wiring, stamp controllers, 9V batteries and power switches. Would have been easier if I hadn't gone with all mitered corners. Getting four mitered corners on the sides is easy. Getting the mitered sides of the top to match the mitered tops of the sides - not so easy when one side is 18" long - too long for the sliding compound miter saw.

Re: If Someone Took ALL Your Turning Tools Away - and

#18

Re: I'd call Bill Grumbine, first...

Donna Banfield

and ask him if he wanted to go 'hunting'.

Then I would call Doug Thompson and Hannes Michelsen.

Re: If Someone Took ALL Your Turning Tools Away - and

#19

Re: If Someone Took ALL Your Turning Tools Away -

Don Orr

Are you asking us if we could get a police sketch artist to draw them for us ?

"It's long and narrow-a wooden handle and metal rod shaped part sticking out. The metal part is kind of U shaped. Well kind of like that but the handle was a little fatter here and thinner there. The tip had a sharper angle and the flute was not as deep as you have it shown. The metal part around the wood where the cutter inserts is brass but kind of tarnished. The handle is mostly black but kind of worn and used to have Crown Pro-PM on it in gold colored printing. Wait, the metal part is not that long, can you draw it shorter? The metal part is not as shiny either, especially near the handle. Now you have it. That's it-that's my favorite spindle gouge!"

Is that what you wanted Charlie ? :D ;)

Re: If Someone Took ALL Your Turning Tools Away - and

#20

No Fibbing

Jennifer Indy.USA

Clay tell the truth.

You have 6 tools.