Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Good Hope Hardwoods - Walnut Slabs & Specialty Hardwood Lumber

Vicki's maple

Posts

Vicki's maple

#1

Vicki's maple

John Lucas

These are the items that I turned from the box of wood that John Jordan sent me. This wood came from a tree that was cut down on their property. His wife played under this tree when she was little. (it must be really old) :) The mirrors were cut from the same piece of wood. The bottom one was dried in the microwave, the top one was roughed and then dried in the microwave. That is the first time I've turned a mirror from green wood. It was quite successful but mostly because maple doesn't move as much.



I wanted this to have some details that you would see in a hand made chair so I added the seat weaving and a detail from a windsor chair arm.


this one is from the same piece of wood but I used Walnut oil instead of lacquer. It made it much more orange.


You've already seen the bowl. The platter was made from the same piece of wood as the mirrors.


The last one was some small pieces that came in the box. Unfortunately the bark came off of the inclusion but it's still pretty nice.


I'll be sending them a CD with the photos per John's request.

Re: Vicki's maple

#2

Don't know why the bowl and platter didn't post

John Lucas


Re: Vicki's maple

#3

Barb Siddiqui

Re: Vicki's maple

Barb Siddiqui

You got a lot of very fine pieces out of that box, John! Very creative.

Re: Vicki's maple

#4

Re: Vicki's maple

Toney Robertson

Those mirrors are just VERY cool. I love both of them.

Have you ever had a problem with the mirrors cracking? I made some out of very dry walnut but the wood still moved enough to cause problems. One mistake I know I made was making the recess very snug for the mirror.

Re: Vicki's maple

#5

Re: Vicki's maple

john lucas

Exactly the problem. I make the mirror opening just a hair larger than the mirror. Then I use my 3/8" thompson detail gouge to open up an area at the bottom of the beads. This recess isn't seen very easily but leaves plenty of room for the wood to move.

Have I ever had one crack. How do you think I decided it needed a recess. On my early mirrors I allowed about 1/8" between the glass and the sides. I got a call one day from my gallery and they said a customer had mirror that was warped and distorted their image. When I got there I looked and the glass was perfectly flat. No distortion. I turned it around to show the owner and saw the crack in the back side. I thought 1/8" was plenty but apparently when you go from my damp garage to a very dry gallery you get a lot of movement.

Re: Vicki's maple

#6

how to cut the recess

john lucas

I mentioned using the detail gouge but forgot to tell you how I do it. I put the bevel on the inside flat of the mirror with the flute pointing straight out. I push the gouge into the wood and then twist the tool so the flute rotates up. This lets the lower lip but the V shaped recess.

I like the detail gouge vs the standard spindle gouge because the metal is so much thicker. The spindle gouge chatter and screams when you do this. The detail gouge just cuts.

Re: Vicki's maple

#7

Re: Vicki's maple

WayneLeach - NW Ont

All the items look great John. Of course your mirrors are always exquisite. I particularly like the shape and detail on the bowl.

You sure are a prolific turner-I am retired and couldn't keep up.

Wayne

Re: Vicki's maple

#8

Re: Vicki's maple

John Jordan

Excellent, John. :) Maybe good enough to overcome the remark about the age of the, uh, tree. :D How about emailing the photos so she can put them on the website? You can send the full sized ones on CD. I'll be at the Craft Center next week, you could bring it by.

John

Re: Vicki's maple

#9

very fine work, John...

GaryG in MD

I'm blown away -- you have outdone yourself here, and that's not easy.

Needless to say, all the larger pieces are wonderful. I really LOVE your basket weave "illusion".

I'm not usually a fan of ornaments, but I like this one.

Cool. ...Gary

Re: Vicki's maple

#10

Leo Cuellar

Sweet!

Leo Cuellar

Re: Vicki's maple

#11

Re: Vicki's maple

Matt Overton

Beautiful stuff, as usual, John. I love your imagination! I haven't gotten to my pieces from the tree yet. Hope to be back in the shop soon.