Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Want Better Milling & Firewood Knowledge?

Anyone have experience with Beeswax s bowl finish?

Posts

Anyone have experience with Beeswax s bowl finish?

#1

Anyone have experience with Beeswax s bowl finish?

ILYA Z

I just bought a can of Beeswax Salad Bowl Finish:

http://www.amazon.com/Claphams-Beeswax-870-3008-Finish-8-Ounces/dp/B0012XP7LQ/ref=sr_1_1?ie=UTF8&s=hi&qid=1279487199&sr=8-1

Applied one coat to a bowl and let it dry for several days. The finish looks matte. How do I make it shinier? How many coats should I apply?

Thanks!

Re: Anyone have experience with Beeswax s bowl finish?

#2

Re: Anyone have experience with Beeswax s bowl fin

Ruth Niles

I used to use beeswax but not the same thing you just bought. I don't think you can get a shine with beeswax. It does give a nice velvety smooth feel but no shine. If you're doing salad bowls, wouldn't the shine wear off after much use and washing? Would people equate high shine to either not as user friendly or "oh goodness, if I ruin this finish, I'll never be able to redo it"?

Re: Anyone have experience with Beeswax s bowl finish?

#3

Re: Anyone have experience with Beeswax s bowl fin

Fred Holder

I've used the Clapham Bee's Wax finish with good results, but it will not come to a high shine. None of the Bee's Wax base finishes that i've used give more than a nice satin finish. I've never tried using one of the buffing systems over the finish, but the final buff with Carnuba Wax might bring it to a high shine. My personal choice is Kerf's Wood Creme, which I use on a great many of my pieces.

Re: Anyone have experience with Beeswax s bowl finish?

#4

Re: Anyone have experience with Beeswax s bowl fin

Bill Howatt

I think the general principle is that you can't really put a hard wax like carnuba over a soft wax like beeswax. My guess is that if you did it with a buffing wheel you would just rub off the softwax and then when it was gone the carnuba would deposit - however, who knows what the mixture would be on the wheel.

I've never obtained any glossy shine with beeswax.

Bill

Re: Anyone have experience with Beeswax s bowl finish?

#5

Re: Anyone have experience with Beeswax s bowl fin

Terry Scott

You need a product with more canuba wax in it

This binds up the wax and gives shine

I have just done a test on this wax and have found it to be getting the results I want

Wax finishes can water mark and stain with fruit going off

http://ecochi.co.nz/categories.php?category=Beeswax-Eco-Polishes/Finishing-Techniques-for-NZ-Native-Wood-

Re: Anyone have experience with Beeswax s bowl finish?

#6

Brad Vietje

... Why do we expect a salad bowl to be glossy???

Brad Vietje

The topic of glossier finishes comes up a lot, and I always wonder, so I thought I'd ask: WHY do you want a salad bowl to be shiny?

It's not glazed ceramic...

It's not chrome-plated...

It's not enamel...

It's not plastic...

And it's not going to stay shiny if you use it.

I am only one fella, and this is entirely subjective -- as in: my opinion, and no more. I feel the finish should relate to the object and how it's used. Ornaments and purely non-utilitarian pieces can be high-gloss. Pens can be glossy, but eventually most get a re-finishing from finger acids and oils. Pieces that are used should have a sheen that seems natural for the way they are used. It's "natural", if you will, for a glazed bowl to be shiny, but not natural for a wooden bowl to be shiny (if you actually use it).

When I see a glossy finish on a wooden salad bowl, I don't feel really motivated to eat the contents, because I wonder about the icky stuff coating the wood, which might be beautiful, but somehow doesn't seem "natural" or right.

Just my gut feelings influencing my opinions, but the lovely color and patina that develop on a softer wax/oil finish -- especially after years of daily use -- are far more beautiful and inviting than a hard-shine, dipped-in-plastic look that some turners strive for. I have a 10" Yellow Birch bowl that we use about 5X/week for popcorn (cooked in oil) that has developed a much nicer look and feel than when I made it ~10 years ago. 20 Years from now it ought to look really nice.

If you invite me over for dinner, please serve my salad in a satin-finish bowl! If it's ice cream, I probably won't even slow down enough to notice the bowl ;~)

Safe spinning,

Brad Vietje

Newbury, VT

Re: Anyone have experience with Beeswax s bowl finish?

#7

Re: ... Why do we expect a salad bowl to be glossy

Carole Valentine

I agree, Brad. I don't want a glossy bowl for food...satin at most. Don't really know why. Just me I guess. Lot of my bowls that I use in the house have no finish at all other than the patina of normal wear. Some have just a light oil finish.

Re: Anyone have experience with Beeswax s bowl finish?

#8

Re: Anyone have experience with Beeswax s bowl fin

Carole Valentine

ILYA, just realized that you did not specify that the bowl was for use. If you want a glossy finish, I think you will have to remove the beeswax (solvent like mineral spirits) and use something else. My preference is Waterlox. I can get everything from a soft satin to a high gloss with it, depending on how I apply it and how many coats I use.

Re: Anyone have experience with Beeswax s bowl finish?

#9

Love Clapham's

J Byron

It is my favorite wax for salad bowls, cutting board and wood kitchen utensils. It will never produce a glossy shine but will produce over the years a deep velvety patina.

My customers love it because after they wash the wood, they can reapply the wax, buff and dry keeping the wood from drying out and cracking. Also, in the winter from the dry in-house air, the wax can keep the wood in good shape.

JB

Re: Anyone have experience with Beeswax s bowl finish?

#10

Re: Love Clapham's

ILYA Z

Everyone,

Thank you for your input. I guess I want to think about whether or not I want my salad bowl shiny.

One follow up q that I have is how to apply Clapham's properly. Instructions are pretty basic: apply with finger or paper towel then let it dry. I did that -- one coat with finger. Now I can still clearly see my fingerprints all over the finish. I suspect this might be from applying too much of this stuff. If so, do I just wipe off the excess with a paper towel or a rug, or is there a better technique to make the final finish more uniform and streak-free?

Another question: the "glossy/matte" matter aside, do you have to reapply this type of finish much more often than the oil-based liquid finishes like http://www.amazon.com/Behlen-Salad-Bowl-Finish/dp/B00075XMNK/ref=sr_1_2?ie=UTF8&s=hi&qid=1279562252&sr=8-2 ?

Thanks!

Re: Anyone have experience with Beeswax s bowl finish?

#11

Re: Love Clapham's

steve worcester

The Claphams works good. You can buy it in a big bucket for shop use and give out a small portion for your customers to renew.

Now in the shiny vs satin, I started out using Behlens salad bowl finish, made several shiny bowl about 10 years ago and they are still shiny. But we don't use a knife in the bowls but do rinse it out.

It's just such a pain to do, since it is a wipe on finish that requires very thin coats and about 10 in my experience is the minimum you need to have before you can sand flat and buff. Too thick it won't dry or leaves bubbles which end up as craters that need to get sanded out.

My wife loves the shiny finish, so when it is a bowl that must pass the wifes approval, shiny it is. I don't get a vote on that one..... (a small price to pay)