Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

This $39 jig will make you a WOODWORKING GOD!

What do you do when...

Posts

What do you do when...

#1

What do you do when...

Randy Gleckler

You have a good idea, you've turned the basic design on the lathe, and then you want to layout the design for carving and embellishing. Problem is your design would highly benefit from you laying out the design, but your having trouble doing much better than a Stick figure looking layout for the patten? Right now I'm trying the draw it out.... wait a few days... draw something a little different... wait... draw again... until hopefully my mind adapts, or my drawing skills do. :-D

Ohh... and the pattern isn't supposed to be a stick figure.

Re: What do you do when...

#2

Re: What do you do when...

Don Orr

Sorry but I can't help with your drawing. I can't draw a straight line with a ruler or a circle with a compass. :\

Good luck though, I sympathize.

Re: What do you do when...

#3

Re: What do you do when...

John Lucas

Drawing and sketching out patterns have been a major hassle for me. Like Don said, I just can't draw worth a darn. I look for patterns everywhere, magazines, nature,Detail photos I shoot or things I see, etc. Then I try to draw and modify these. If that isn't working just right I make a test piece out of scrap and try working on that to see if the patterns work.

Even then they often suck and need modification. I have one right now I'm working on. It looked good on paper, looked decent when I burned the patterns, is really missing the boat when I put a black finish on it. It will have to be modified to achieve the look I want. Some time you win and sometime you lose.

Re: What do you do when...

#4

Re: What do you do when...

Molly Winton

You get a sketch pad, or just some paper, and draw, draw, draw. Practice is what makes it work. Over and over again on paper until you're satisfied, THEN go to your piece. Try breaking down your design in to smaller components, so you're not overwhelmed with the entire image. Go piece by piece.

Re: What do you do when...

#5

Re:I have a "chalkboard" in my .....

JamieDonaldson

..shop space, and working out the kinks can often be accomplished by drawing options or design opportunities as I question what direction to go.

Re: What do you do when...

#6

What's a chalkboard

John Lucas

All we have on campus now are White boards and Smart Boards. You must be really old. :)

Re: What do you do when...

#7

Re:It's actually a whiteboard, but ....

JamieDonaldson

that didn't seem to be an accurate discription, since any ol' board can be white! And what's a "smartboard?" I have a feeling this answer will also show just how old I am. :b :\

Re: What do you do when...

#8

Mike Stafford

Re: What's a chalkboard

Mike Stafford

I'll bet if I checked with some of your teachers they could help you remember that chalkboards were those things that used those erasers you banged after school for misbehaving...

Me,I just heard about kids doing it.

Re: What do you do when...

#9

Re:I have a "chalkboard" in my .....

clay foster

I once turned a vessel and painted it with chalk board paint. Then I could draw designs on it to see how they looked on a round volume. I also left it laying around with a box of colored chalk and an eraser for other people to draw on.

Re: What do you do when...

#10

Re: What do you do when...

fgvanatta

Most often I use a CAD program (Delta-CAD, in my case) to lay out and modify designs 'till I get what I want, then I print them out full size.

Google Sketchup is also a great tool - and free - for visualizing 3D designs. And printing them out full size, too.

Frank

Re: What do you do when...

#11

Richard Allen

Transfer paper *LINK*

Richard Allen

Transfer paper. Print out designs or pictures. There are tons of pattern books which artists use.

Transfer paper is like carbon paper. It comes in different colors. Transfer as much detail as you need to. You can fill in the blanks freehand.

Practice the technique on a board. I was astounded at the level of detail I could get with this technique.

Some folks will laser print (or xerox) a pattern or drawing and transfer the toner off the paper using heat or xylne (an artist "blending" pen).

When you find a design style that you like you will find that you need less and less transfer marks to get the results you are looking for.

If you select a genre of images or designs which mean something to you then you will be more successful in the long run. For example if you liked backpacking in your youth then images which remind you of backpacking would be a good choice. Wildlife, woodland flowers, moutain vistas, backpacking equipment... The point is to put something of yourself into you work.


Transfer Paper

Re: What do you do when...

#12

It's an interactive white board *LINK*

john lucas

Jamie These board are really cool. You can draw on them and then move things around just like moving a mouse on the computer. It is really cool what all they can do. They have started installing them in some locations on campus.


http://www.google.com/products/catalog?q=Smart+board&oe=utf-8&rls=org.mozilla:en-US:official&client=firefox-a&um=1&ie=UTF-8&cid=12764338746431218982&ei=mbk_TKb5E8L68AbyqbzjCw&sa=X&oi=product_catalog_result&ct=result&resnum=3&ved=0CD0Q8wIwAg#

Re: What do you do when...

#13

Re: What do you do when...

Keith Newton----Little Rock, Arkansas

Randy, It would be helpful for all those wanting to help you with your design if you would try to describe what you are trying to achieve. Maybe provide a link to works by someone else.

If it is something, it helps to have and indexing dividing head to mark off x # of degrees, in longitudinal lines. You can then draw something / anything really. Where those lines intersect the longitudinals, will mark out a grid for exact duplicates around the other sides when you spin the lathe, and mark latitude lines where the design lines intersect the first longitude lines.

If that doesn't help, just draw something, and then go at it. You will learn something as you go. You become a better artist craftsman by DOING and learning than over-thinking it and locking up.

Just get over it, get going, and try to have FUN.

Re: What do you do when...

#14

Re: What do you do when...

Don Wilcut

and sometimes you get rained out!

Re: What do you do when...

#15

Leo Cuellar

Re: What do you do when...

Leo Cuellar

Hi Randy, research into patterns that are similar to what I'm working on helps me. Sometimes I find something similar in books and use a photocopier to make copies and modify those when my drawings aren't working. Once in a while I get lucky and find something similar in an antique shop that I can study, haven't gotten the nerve to ask if I can make a rubbing or take photos. If you have a friend who likes to draw, sometimes they are willing to help also :)

Leo