My FIL passed away recently and I wanted to make something to give to his church in his memory, so I went out to the stash and found what I think is the prettiest piece of walnut that I have seen. The crotch grain makes me think of a comet. My hope is that they used it for communion on a regular basis.
12 1/2" in diameter. Only about an 1" thick. AO finish and buffed. Laser engraving done by a local guy
Turning at its finest - creating a memory - which will be in use in a special place for a special purpose. Beautiful wood turned nicely and that beauty brought out so others may experience what turners experience regularly - the otherwise hidden beauty that surrounds us - but don't usually see.
It's often that turning for a purpose brings out the best in us - as this piece clearly shows. And the person who did the lettering picked up some of that feeling for the font selected and the placement of the letters goes well with the piece. The fact that they were laser engraved is of no consequence - the message is. And would that more folks took the teachings of Christ, or Mohamed or the Dalai Lama to heart- and apply them.
If "What you do to the least of Mine, you do to Me." were applied more often, the world would surely be a better place.
Thank you for sharing the photo of this piece, and a bit of the story behind it.
The engraving was in a way a collaboration between the two of us. I told him that I wanted script and then he picked the font but I was very adamant about the placement. I wanted the crotch grain to dissect the writing. He almost mistakenly put the script on top of the grain but fortunately checked with me before do it.
I also had him engrave on the back "in Memory of Charlie" so that years from now people will know why the plate exists.