Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Good Hope Hardwoods - Walnut Slabs & Specialty Hardwood Lumber

That slippery slope..

Posts

Re: That slippery slope..

#26

Barb Siddiqui

Thank you Wally

Barb Siddiqui

for your open-hearted generosity. I'll take you up on your offer later.

The more I hear about this lathe, the more excited I become. I had no idea they were so sought after. Molly advertised it as "reversible, variable speed - 0 to 2700." I've been struggling with belt changes on the Jet Mini going from 800 up, and the inconvenience of it makes me tend to do everything at one speed. I don't know about indexing on the Woodfast, but I figure when I want to index, a homemade jig can be made for it. Right now we're just examining the garage beams to determine the best way to unload the heavy thing when we finally get it home. Oh, and I have lots of fruitwood here, though not in wide planks. I tend to find lots of limb wood and very few wider trunk pieces. But yes, I have some.

Re: That slippery slope..

#27

Re: Thank you Wally

John Jordan

I love the Woodfast shortbed lathe. I made a LOT of work on mine, and sold a load of them for Craft Supplies, too. :) You will like it very much.

John

Re: That slippery slope..

#28

Barb Siddiqui

Thanks John. I'm excited to go get it!

Barb Siddiqui

Re: That slippery slope..

#29

John, do you still have that lathe?

Dave Peebles Lyons, Ohio

The first really good lathe I ever turned on was your Woodfast. Even if I did blow a bowl right off the faceplate. :) I still remember your advise... "Did you stop to see what you were doing wrong? or did you just stick the gouge right back in"

Yep... I just stuck the gouge right back in.:) That has stuck with me all these years. I have to admit I use it with people who come to me to learn to turn too. Good advise never goes out of style.

Barb, you are getting a fine machine. Enjoy!!

Dave

Re: That slippery slope..

#30

Barb Siddiqui

Re: John, do you still have that lathe?

Barb Siddiqui

Thanks David. I'm beginning to feel the pressure of Great Expectations! But I know it's going to be fun to learn on.

Re: That slippery slope..

#31

Re: Thanks John. I'm excited to go get it!

Russ_Fairfield

Barb, It isn't a recommended way of unloading a lathe, but I know a guy who unloaded a new Woodfast very quickly about 15 years ago. After the ropes and crate had been removed, he hit the brakes too hard as he was backing into the garage. All it did was scuff up the paint and bend the hinge on the top of the headstock.

Re: That slippery slope..

#32

Re: John, do you still have that lathe?

John Jordan

Dave, I got rid of everything but the Stubby some years ago. Metalworking tools etc have taken over the shop. and I made a new small room for my turning and carving.

John

Re: That slippery slope..

#33

Barb Siddiqui

S-h-u-d-d-e-r

Barb Siddiqui

We're discussing methods for two old people (George is nearly 68, I'm 60) to handle this 'dismount.' My son will show up to help at Molly's, so we'll have more muscle there, but we're on our own at home. May rent some kind of free-standing hoist for engine repair. May hang chain/rope from the roll-up door header. After your story, I think I'll let George handle the pick-up, so I'm the one who can do the yelling if necessary!

Re: That slippery slope..

#34

Dang Wally!

Jennifer Indy.USA

I'm gonna come retire where you are! 6 lathes in a community woodshop? What's not to love about that!

:)

Re: That slippery slope..

#35

Re: Dang Wally!

Wally Dickerman in Arizona

Hey Jen....We'll be neighbors!!

Actually, we also have a large Pm lathe and a Jet mini for pen turners. It's a great facility. In the wintertime when the snowbirds are here there might be 70 or 80 people, even a few ladies, doing their thing on all kinds of wood projects.

We make well over a thousand wood toys every year to be sent to poor area churches mostly. Once a week a group of ladies come in and paint them. It's very gratifying when letters come in after Christmas, sometimes saying that these were the only toys some kids received.

Wally

Re: That slippery slope..

#36

Re: Dang Wally!

Jennifer Indy.USA

That sound like a great place to be Wally. I bet it is very rewarding.

Bless your heart Wally.

Re: That slippery slope..

#37

Barb Siddiqui

Re: Dang Wally!

Barb Siddiqui

Maybe Wally's retirement community woodshop has something to do with Wally living there?