Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Nearly 100 Exotic Wood Species, Direct-Imported Since 1972. Shop Slabs & Turning Stock.

New Materials

Posts

New Materials

#1

New Materials

Ryker

Here are two turnings that dont rank high on the difficulty scale, but were fun none the less! A couple turnings for my bike. Grips out of rosewood and aluminium and a choke knob out of red acrylic. I think they will look good when installed. Thanks for looking. R

http://i303.photobucket.com/albums/nn158/neptune1970/choke.jpg

http://i303.photobucket.com/albums/nn158/neptune1970/bars.jpg

Re: New Materials

#2

Dick Hines

Re: New Materials

Dick Hines

What bike are you putting these on?

Re: New Materials

#3

Re: New Materials

Ryker

They are going on my Harley. Thnx R

Re: New Materials

#4

Leo Cuellar

Re: New Materials

Leo Cuellar

Nice job! Is that silver, stainless, or aluminum inlay? What did you finish with?

Re: New Materials

#5

Re: New Materials

Ryker

It is aluminum, I thought it would be the easiest to turn. However I did learn that even though two part epoxy holds up to more heat, It will still break down. And it did twice on me. Had to reglue each grip because I was a little bit to aggressive on the sanding. Also, only went up to 220 grit on the main grip and 600 on the rings to give it a chrome like shine. I used Mahoney's salad bowl oil mix for the finish. It gets a little tacky the more I ride them. Last thing I want is to loose grip while riding. R

Re: New Materials

#6

Dick Hines

Re: New Materials

Dick Hines

I have though of doing some for my bike. Wonder how the viberation will be?

Re: New Materials

#7

Leo Cuellar

Re: New Materials

Leo Cuellar

Thanks for the info, Ryker. They really do look sweet. I've been playing around with the LocTite epoxy lately, but haven't put it to a heat test yet :D

Leo

Re: New Materials

#8

Re: New Materials

Ryker

Ya, the vibration does run through your hands quicker than my old soft stock grips for sure. Also the last pair I made I have been running about 4months are getting pretty gummed up. They are out of a lighter wood, Apricot with a rosewood band at the end. Your hands put alot of grime on them, so they dont look pretty for long. I guess maybe some topcoat might help, but then they become more slippery. Give or take? R

Re: New Materials

#9

Dick Hines

Re: New Materials

Dick Hines

I guess I will stay with the stock grips on my Big Dog. I don't want the be changing the grip every couple of months.

I do like the look though. Ride safe.

Re: New Materials

#10

Leo Cuellar

Re: New Materials

Leo Cuellar

I haven't tried any of the texturing/spiral tools, but maybe that would be something to try for a better grip. I was thinking about trying to make one from a spare grindstone dressing tool. Or perhaps several small radius flutes around the circumference would be a better look. You might start a thread to get some opinions from folks here who know way more than I do about which would be the best tool to buy. L

Re: New Materials

#11

Re: New Materials

Ryker

Ya, I thought about fluting them, but because the plastic throttle that its going over is so big, the wall thickness of the wood grips is only about 1/4". So I thought that making it weaker with flutes wouldnt be a good idea. Plus I manhandle my bars so much that I dont want to accidently crack one and have to start all over again. I might do vertical grooves next time, just slightly to give a little more gripping power. Say 1/8" wide dips every 1/2" or so should do the trick. We will see, I like the new grips, so it will be awhile before I make another pair, unless someone is interested. R

Re: New Materials

#12

Leo Cuellar

Being stylish isn't always easy   

Leo Cuellar