Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

A natural, durable finish with minimal coats and fuss popular among woodworkers, flooring professionals, and furniture makers

Jet mini question

Posts

Jet mini question

#1

Jet mini question

Ray - Middletown, IN

Anyone know the lead screw thread on the tailstock spindle offhand? Silly E-Ring won't stay in place on a friends lathe and I may make him a new lead screw. We are demoing on his lathe tomorrow (early) and I won't have time to stop in the shop and check my 1236 which is the same I believe.

Thanks,

Ray

Re: Jet mini question

#2

Re: Jet mini question

Jim Sebring

My Jet 1220 tailstock pitch is 0.056/turn = 1/16" = 16 tpi. I'm not sure, but the pitch is probably the same on the Jet 1014 mini.

Re: Jet mini question

#3

.063=16tpi //////// .056=18tpi

Gil Jones

Re: Jet mini question

#4

Thanks guys, now to make a new one.

Ray - Middletown, IN

We completely ruined the screw today. I may try to rework the old one instead of trying to find a left hand die.

Ray

Re: Jet mini question

#5

Ouch, LH does matter

Gil Jones

Hope I did not lead you astray with those numbers.

I've never had a tailstock quill apart

, and they may all be LH threads for all I know.

They also could be metric.

Good luck with it.

Gil

Re: Jet mini question

#6

Re: Ouch, LH does matter

Jim Sebring

Sorry about the decimal-to-fraction conversion error. 18 tpi it is.