Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

VPS-Level Performance. Fully Managed. No Hassle.

Salad Tongs Plan

Posts

Salad Tongs Plan

#1

Salad Tongs Plan

Greg in Oshkosh

Looking for plan for salad tongs to make for wood bowl. My first attempt needed too much pressure and didn't look "wonderful" I would like to make the "tweezers" type rather than the "scissors" type. I didn't find much information searching the archives.

Re: Salad Tongs Plan

#2

Precisely what you did not want....

Barry Irby

My son made the lower set, the two fisted model and I made the other set. They are the scissors type and rather long, but they get a lot of use around the grill and frying pans and ....salads. We also have a similar but simpler set like my son's set and they get a huge amount of use with all kinds of cooking. Notice they are left and right handed.

Re: Salad Tongs Plan

#3

Hi Greg, Here's some...

Scott Burr in Ben Lomond CA

These are not finished as of yet, but I hope you get the idea and how one could make them prettier. This design is plain utilitarian. It came out of a WW mag I'll dig around if you'd like to find it.

Cheers

Re: Salad Tongs Plan

#4

Re: Hi Greg, Here's some...

Ray - Middletown, IN

Scott, did you steam bend your fingers?

Thanks,

Ray

Re: Salad Tongs Plan

#5

No...

Scott Burr in Ben Lomond CA

After the fingers are cut you slide a 1/8 thick shim between the fingers.

Soak the wood in hot water. I left them there over night with a weight on them to keep'em down under.

I dried them in the oven with no heat. I have a gas oven the pilot is always lit (unlike some airlines) it's just warm. Takes about 3 hours to set.

Re: Salad Tongs Plan

#7

Re: Hi Greg, Here's some...

Kieran

Scott, If you ever come up witht the article, I would appreciate seeing it. Thanks, Kieran

Re: Salad Tongs Plan

#9

Thanks Scott

Kieran