Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

This is the most versatile work station you will ever use

Bowl turning at Marc Adams! *LINK*

Posts

Bowl turning at Marc Adams! *LINK*

#1

Bowl turning at Marc Adams! *LINK*

Jennifer Indy.USA

Hey all,

Last week I had the opportunity to teach a 5 day class at Marc Adams School of Woodworking and had an absolute blast. I had a full class of mostly folks that had turned before but did have 3 that had never stood at a lathe. It was a great group of people and we all really had a good time. I can relate to Steve's post about never a moment to rest. It's non stop from early morning till into the evening. Clay came along for the week and was such a great help to have there. Don who is the turning studio director and usually there helping run the turning studio was off last week with his grandkids so Clay was my go to man. He cut what we counted in total over 150 bowl blanks. For 17 students you gotta keep feeding them blanks! We really did have a ball and are looking forward to next year. I wanted to share some pictures from the week so if you go to the link below you'll get there.

Looking forward to kicking my feet up this week!

Jen


The Fundamentals of Bowl Turning

Re: Bowl turning at Marc Adams! *LINK*

#2

George Taylor

Re: Bowl turning at Marc Adams!

George Taylor

From the pictures; it sure looks like a productive week! Great job, Jen!

George

Re: Bowl turning at Marc Adams! *LINK*

#3

Re: Bowl turning at Marc Adams!

Jennifer Indy.USA

George as you know it's a really good time there. You need to come back join us for another week.

Jen :)

Re: Bowl turning at Marc Adams! *LINK*

#4

Mike Stafford

Re: Bowl turning at Marc Adams!

Mike Stafford

Great pictures. Everyone looks engaged and happy. I am glad you had a good week!

Re: Bowl turning at Marc Adams! *LINK*

#5

Steven Antonucci

150 bowls is a lot of clean-up

steven antonucci

We probably cut about 12 with the four guys, in two days and it was a pretty god clean-up. I can't imagine the mess from 150 over a week...did you sweep it out daily?

Also, 17 in a class sounds like chaos. How did you handle a crowd that large? I have 8 in September...an four almost wore me into the ground!

Inquiring minds want to know...

S

Re: Bowl turning at Marc Adams! *LINK*

#6

Steve Kubien

Re: Bowl turning at Marc Adams!

Steve Kubien

Sounds like a good time was had by all and judging from the pics, that is indeed the case. Sounds like you had competent shop-slave/shop-help too!

Re: Bowl turning at Marc Adams! *LINK*

#7

Re: Bowl turning at Marc Adams!

John Lucas

Gosh I thought teaching 9 was bad enough. Can't imagine having 17. Of course that is by myself. Maybe Clay can come down and help me. :)

Re: Bowl turning at Marc Adams! *LINK*

#8

Re: Bowl turning at Marc Adams!

Don Orr

Looks like a great week for all involved. Did you wear roller skates to keep up with all those students ? :D

Very impressive shop too !

Re: Bowl turning at Marc Adams! *LINK*

#9

Re: 150 bowls is a lot of clean-up

Jennifer Indy.USA

Steve you would think it would be mass chaos but it's really not. Probably the most hectic part of the week is Monday morning after I demo sharpening a bowl gouge and then everybody is wanting to re-shape or re-grind their gouge. After about 10:30 am it settles down people just get into it. You're constantly moving from lathe to lathe helping people and answering questions but that's part of what I love about teaching. I typically did two demos a day and the rest was them turning. I leave it up to them if they want to clean up daily and after they see the mess they usually do. I would say there was about 5 of those barrels in the pictures hauled out every day. It's a completley different setting from when I've taught places with only 8 students but I love it just the same. The staff at the school is top shelf and on the ball. If you need something they do whatever it takes to get it for you....and usually you have it in your hand in 5 minutes. It really is a great place to teach and to take a class.

Re: Bowl turning at Marc Adams! *LINK*

#10

Re: Bowl turning at Marc Adams!

Jennifer Indy.USA

I tried rollerblades Don, but the shavings kept tripping me up so I switched to jet propelled sneakers :). Naw, it's not that crazy. I was lucky and had some really great students who made my job easy.

Re: Bowl turning at Marc Adams! *LINK*

#11

Re: Bowl turning at Marc Adams!

Jennifer Indy.USA

Well Mike it was a neat group of people but I have to say....there was no kissy-facing in my class like there was in yours! :D

It was a good week.

Jen

Re: Bowl turning at Marc Adams! *LINK*

#12

Re: Bowl turning at Marc Adams!

Carol Reed

Sorry you missed out on the kissy-face stuff. I rather enjoyed it! :D

Re: Bowl turning at Marc Adams! *LINK*

#13

Steven Antonucci

My weekend was "where'd that bang come from?"

steven antonucci

Still, we had a great time., but I had worn a trench along the aisle here the lathes are...

Oh, yeah-we only found two spur centers too for four lathes...

And my shop assistant wasn't a turner...

Still, a good time was had by all. I worked them hard, and oddly, nobody came back to the studio on Saturday night after dinner :) It's good being 20 years younger than your students :)

S

Re: Bowl turning at Marc Adams! *LINK*

#14

Steven Antonucci

Get some Heelies!

steven antonucci

Re: Bowl turning at Marc Adams! *LINK*

#15

Ellis Walentine

Hey you rascal

Ellis Walentine

I saw this sighting in your pile of pix. Nice one! I'll have to put it in the queue.

Ellis


Re: Bowl turning at Marc Adams! *LINK*

#16

Re: Hey you rascal

Jennifer Indy.USA

Glad you caught that Ellis!

And for the record.....that ugly bowl you see sitting there is the first bowl I ever made...circa 1999 :)

Re: Bowl turning at Marc Adams! *LINK*

#17

Ellis Walentine

Nice first bowl, Jen

Ellis Walentine

It's a heckuva lot nicer than the first one I turned (in 1959). Thanks for sharing your Marc Adams pics. He's really got himself a nice school there. I must pay him a visit sometime.

Ellis

Re: Bowl turning at Marc Adams! *LINK*

#18

Mike Stafford

Jen, what can I say.....

Mike Stafford

I kiss the girls and make them smile....If you had been there I would have kissed you too.

Re: Bowl turning at Marc Adams! *LINK*

#19

Re: Nice first bowl, Jen

Jennifer Indy.USA

Oh Please! I wrote that because that bowl is very poorly designed and has a bottom about 2" thick and 4" diameter! I like to bring it to show the students what NOT to make. At the time, however, I thought it was the most amazing thing I'd ever made! Well, next to Weston that is :)

Yes you should pay him a visit and while you're at it stop by and share a meal and a home brew with two folks that would love to have you.

Jen

Re: Bowl turning at Marc Adams! *LINK*

#20

Smooooch! 

Jennifer@Indy.USA